Astak Mole Lower Case Replacement - iFixit 수리 안내서

소개

In order to replace or fix many parts on the Astak Mole, the mother board must be accessed. This task requires full disassembly of the bottom section of the Mole. This is very easy to accomplish.

필요한 것

1 단계 Lower Case

Astak Mole Lower Case Replacement, Lower Case: 1 단계, 이미지 1/1

Remove the four bottom tabs in order to access the bottom screws.

2 단계

Astak Mole Lower Case Replacement: 2 단계, 이미지 1/1

Remove all four 14 mm Phillips #1 screws.

3 단계

Astak Mole Lower Case Replacement: 3 단계, 이미지 1/1

Remove the SD card.

4 단계

Astak Mole Lower Case Replacement: 4 단계, 이미지 1/1

Pry up the motherboard on the four points using a spudger.
The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

5 단계

Astak Mole Lower Case Replacement: 5 단계, 이미지 1/1

Gently pull back the motherboard to expose many of the component's wired connections.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 4명과 함께

Joseph Bello

회원 가입일: 09/20/16

228 평판

안내서 2개 작성하였습니다

배지 +4개 더

팀

USF Tampa, Team 2-2, Blackwell Fall 2016 USF Tampa, Team 2-2, Blackwell Fall 2016 회원

USFT-BLACKWELL-F16S2G2

4 회원들

안내서 12개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 5

전체 시간: 233