Skip to main content

소개

The guide allows for you to take apart and replace the channel selection switch on an Astro A50 gaming headset with only a Phillips head screwdriver.

부품

지정된 부품이 없습니다.

  1. Remove the foam ear padding by pulling it straight to you Remove the foam ear padding by pulling it straight to you
    • Remove the foam ear padding by pulling it straight to you

  2. Remove the four 3.5mm Phillips head screws circled in red, and remove the grey cover
    • Remove the four 3.5mm Phillips head screws circled in red, and remove the grey cover

  3. 안드로이드 수리 키트

    새 스크린 혹은 배터리는 단 하나의 키트로 충분합니다.

    지금 장보기

    안드로이드 수리 키트

    새 스크린 혹은 배터리는 단 하나의 키트로 충분합니다.

    지금 장보기
  4. Remove the four 3.5mm Phillips head screws circled in red and remove the silver cover.
    • Remove the four 3.5mm Phillips head screws circled in red and remove the silver cover.

  5. Remove the motherboard remove the four 3.5mm long Phillips head screws circled in red. Remove the 3.5mm Phillips head screw circled in blue to remove secondary motherboard.
    • Remove the motherboard remove the four 3.5mm long Phillips head screws circled in red.

    • Remove the 3.5mm Phillips head screw circled in blue to remove secondary motherboard.

  6. Separate the secondary mother board from the motherboard by pulling firmly to the right on the white connector.
    • Separate the secondary mother board from the motherboard by pulling firmly to the right on the white connector.

결론

To reassemble your device, follow these instructions in reverse order.

William Czerwonka

회원 가입일: 2017년 09월 21일

201 Reputation

안내서 2개 작성하였습니다

IUPUI, Team S1-G1, Baechle Fall 2017 IUPUI, Team S1-G1, Baechle Fall 2017 회원

IUPUI-BAECHLE-F17S1G1

2 회원들

안내서 4개 작성하였습니다

댓글 0개

댓글 쓰기

View Statistics:

Past 24 Hours: 1

Past 7 Days: 22

Past 30 Days: 77

All Time: 1,745