Skip to main content

소개

A fan replacement will be necessary in the event that your notebook is overheating. You can find out how to replace the Asus F554LA notebook's fan with this guide. You will need a plastic opening tool and a Phillips #0 screwdriver head.

  1. Make sure the notebook is off and has been unplugged from any power source. Flip the notebook over and remove the 10 screws from the back plate with a #0 Phillips head screwdriver.
    • Make sure the notebook is off and has been unplugged from any power source.

    • Flip the notebook over and remove the 10 screws from the back plate with a #0 Phillips head screwdriver.

    • Six (6) will be 9.6mm and four (4) will be 12.7mm.

  2. With a plastic opening tool, gently lift and remove the back cover to expose the internal components. (Not pictured) Remove the three cables attached to the keyboard and one touch-pad. (Not pictured) Remove the three cables attached to the keyboard and one touch-pad.
    • With a plastic opening tool, gently lift and remove the back cover to expose the internal components.

    • (Not pictured) Remove the three cables attached to the keyboard and one touch-pad.

  3. Unscrew the three 5.7 mm hard drive-motherboard connection screws with a #0 Phillips head screwdriver. Remove the small rectangular hard drive-motherboard connection board.
    • Unscrew the three 5.7 mm hard drive-motherboard connection screws with a #0 Phillips head screwdriver.

    • Remove the small rectangular hard drive-motherboard connection board.

    • (Not pictured) Remove the hard drive.

  4. 맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now

    맥북 배터리 수리 키트

    기본 가격은 $69.99

    Buy Now
  5. Unscrew the four 5.7 mm battery screws   with a #0 Phillips head screwdriver. Remove the battery.
    • Unscrew the four 5.7 mm battery screws with a #0 Phillips head screwdriver.

    • Remove the battery.

  6. Unscrew the two 2.7 mm and one 5.7 mm CD drive screws with the Phillips #00 screwdriver. With the plastic opening tool, gently pry the drive out from the metal brackets that hold it in place. With the plastic opening tool, gently pry the drive out from the metal brackets that hold it in place.
    • Unscrew the two 2.7 mm and one 5.7 mm CD drive screws with the Phillips #00 screwdriver.

    • With the plastic opening tool, gently pry the drive out from the metal brackets that hold it in place.

  7. Remove the eight  5.7mm screws using the  Phillips #0 Screwdriver.
    • Remove the eight 5.7mm screws using the Phillips #0 Screwdriver.

  8. Unscrew and remove the two  5.7mm screws from the fan with the Phillips #0 Screwdriver. Gently lift the motherboard and fan to access the components underneath.
    • Unscrew and remove the two 5.7mm screws from the fan with the Phillips #0 Screwdriver.

    • Gently lift the motherboard and fan to access the components underneath.

  9. Unscrew and remove the four 0.01mm screws using the Phillips #0 Screwdriver from  the heatsink.
    • Unscrew and remove the four 0.01mm screws using the Phillips #0 Screwdriver from the heatsink.

  10. Gently  unplug power strip with fingers or tweezers to remove fan.
    • Gently unplug power strip with fingers or tweezers to remove fan.

    • Gently pull fan from heatsink.

    • Replace fan.

결론

To reassemble your device, follow these instructions in reverse order.

Aaron Ratliff

회원 가입일: 2018년 10월 09일

497 평판

안내서 4개 작성하였습니다

USF Tampa, Team S1-G2, Leahy Fall 2018 USF Tampa, Team S1-G2, Leahy Fall 2018 회원

USFT-LEAHY-F18S1G2

4 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 2

지난 30일: 7

전체 시간: 64