주요 콘텐츠로 건너뛰기

소개

This guide will go over the process of removing and replacing the CPU fan and heat sink assembly.

부품

지정된 부품이 없습니다.

  1. Asus Q534U CPU Fan/Heat Sink Replacement, Back Case Removal: step 1, image 1 of 1
    • Make sure the device is turned off and unplugged from the charger.

    • Use a T5 screwdriver to remove all 10 screws that secure the bottom cover.

    • Pull off the back cover of the laptop.

    • A pry tool may be needed to pull off the back cover.

  2. Asus Q534U CPU Fan/Heat Sink Replacement: step 2, image 1 of 2 Asus Q534U CPU Fan/Heat Sink Replacement: step 2, image 2 of 2
    • Wedge an opening tool under the battery's bundled cable connector, and gently pry the connector up and to disconnect the battery.

  3. Asus Q534U CPU Fan/Heat Sink Replacement: step 3, image 1 of 2 Asus Q534U CPU Fan/Heat Sink Replacement: step 3, image 2 of 2
    • Lift up the black tab next to the silver ribbon cable.

    • Pull lightly on the blue tabs until the silver cable is free.

  4. Asus Q534U CPU Fan/Heat Sink Replacement: step 4, image 1 of 1
    • Use a Phillips #00 screwdriver to remove the 5 marked screws.

    • Gently remove the battery.

    • Do not bend or puncture the laptop's lithium-polymer pattery.

  5. Asus Q534U CPU Fan/Heat Sink Replacement, CPU Fan/Heat Sink: step 5, image 1 of 2 Asus Q534U CPU Fan/Heat Sink Replacement, CPU Fan/Heat Sink: step 5, image 2 of 2
    • Using the iFixit opening tool, gently pry the CPU fan connector out of the socket.

  6. Asus Q534U CPU Fan/Heat Sink Replacement: step 6, image 1 of 2 Asus Q534U CPU Fan/Heat Sink Replacement: step 6, image 2 of 2
    • Move the black cable located around the CPU fan out of the holder.

    • Remove the following 9 screws:

    • Three Phillips screws

    • Six Phillips screws

    • Make sure not to mix up both types of screws.

    • Gently pull vertically on the CPU fan/ heat sink assembly until it is free.

    • Before placing a new CPU fan/heat sink assembly, the CPU and GPU surfaces must be cleaned off and thermal compound must be reapplied.

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

mmedina

회원 가입일: 2016년 04월 07일

665 평판

안내서 2개 작성하였습니다

UMass Dartmouth, Team S66-G6, Rockett Fall 2017 UMass Dartmouth, Team S66-G6, Rockett Fall 2017 회원

UMASSD-ROCKETT-F17S66G6

3 회원들

안내서 5개 작성하였습니다

댓글 한 개

Is it possible to replace the fan only without removing the full heatsink or is it fused together as one unit?

Bork Bois - 답글

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 13

30일 전: 32

전체 시간: 2,410