기기를 수리하세요 커뮤니티 상점

Asus Q534U CPU Fan/Heat Sink Replacement

소개

This guide will go over the process of removing and replacing the CPU fan and heat sink assembly.

필요한 것

  1. Asus Q534U CPU Fan/Heat Sink Replacement, Back Case Removal: 1 단계, 이미지 1/1

    • Make sure the device is turned off and unplugged from the charger.

    • Use a T5 screwdriver to remove all 10 screws that secure the bottom cover.

    • Pull off the back cover of the laptop.

    • A pry tool may be needed to pull off the back cover.

    편집

  2. Asus Q534U CPU Fan/Heat Sink Replacement: 2 단계, 이미지 1/2 Asus Q534U CPU Fan/Heat Sink Replacement: 2 단계, 이미지 2/2

    • Wedge an opening tool under the battery's bundled cable connector, and gently pry the connector up and to disconnect the battery.

    편집

  4. Asus Q534U CPU Fan/Heat Sink Replacement: 3 단계, 이미지 1/2 Asus Q534U CPU Fan/Heat Sink Replacement: 3 단계, 이미지 2/2

    • Lift up the black tab next to the silver ribbon cable.

    • Pull lightly on the blue tabs until the silver cable is free.

    편집

  5. Asus Q534U CPU Fan/Heat Sink Replacement: 4 단계, 이미지 1/1

    • Use a Phillips #00 screwdriver to remove the 5 marked screws.

    • Gently remove the battery.

    • Do not bend or puncture the laptop's lithium-polymer pattery.

    편집

  6. Asus Q534U CPU Fan/Heat Sink Replacement, CPU Fan/Heat Sink: 5 단계, 이미지 1/2 Asus Q534U CPU Fan/Heat Sink Replacement, CPU Fan/Heat Sink: 5 단계, 이미지 2/2

    • Using the iFixit opening tool, gently pry the CPU fan connector out of the socket.

    편집

  7. Asus Q534U CPU Fan/Heat Sink Replacement: 6 단계, 이미지 1/2 Asus Q534U CPU Fan/Heat Sink Replacement: 6 단계, 이미지 2/2

    • Move the black cable located around the CPU fan out of the holder.

    • Remove the following 9 screws:

    • Three Phillips screws

    • Six Phillips screws

    • Make sure not to mix up both types of screws.

    • Gently pull vertically on the CPU fan/ heat sink assembly until it is free.

    • Before placing a new CPU fan/heat sink assembly, the CPU and GPU surfaces must be cleaned off and thermal compound must be reapplied.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

mmedina

회원 가입일: 04/07/16

749 평판

안내서 2개 작성하였습니다

배지: 15

배지 +12개 더

팀

UMass Dartmouth, Team S66-G6, Rockett Fall 2017 UMass Dartmouth, Team S66-G6, Rockett Fall 2017 회원

UMASSD-ROCKETT-F17S66G6

3 회원들

안내서 5개 작성하였습니다

댓글 한 개

Is it possible to replace the fan only without removing the full heatsink or is it fused together as one unit?

Bork Bois - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 3

30일 전: 12

전체 시간: 2,871