주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

This guide will show you how to replace the back panel on the ASUS ROG G53SW-XT1

  1. Unplug the power cable and flip the computer over.
    • Unplug the power cable and flip the computer over.

  2. Unlock the battery by pushing the switch to the right.
    • Unlock the battery by pushing the switch to the right.

  3. Push and hold the left switch, then pull the battery out. Push and hold the left switch, then pull the battery out.
    • Push and hold the left switch, then pull the battery out.

  4. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  5. Insert a spudger, or plastic opening tool, into these five slots and pry upwards to pop up the keyboard. Insert a spudger, or plastic opening tool, into these five slots and pry upwards to pop up the keyboard. Insert a spudger, or plastic opening tool, into these five slots and pry upwards to pop up the keyboard.
    • Insert a spudger, or plastic opening tool, into these five slots and pry upwards to pop up the keyboard.

  6. Disconnect the keyboard ribbon cables from the motherboard. Disconnect the keyboard ribbon cables from the motherboard. Disconnect the keyboard ribbon cables from the motherboard.
    • Disconnect the keyboard ribbon cables from the motherboard.

  7. Insert your screwdriver into the locking mechanism and slide it to the left. This will unlock the hand rest and allow you to pull it free. Insert your screwdriver into the locking mechanism and slide it to the left. This will unlock the hand rest and allow you to pull it free. Insert your screwdriver into the locking mechanism and slide it to the left. This will unlock the hand rest and allow you to pull it free.
    • Insert your screwdriver into the locking mechanism and slide it to the left. This will unlock the hand rest and allow you to pull it free.

  8. Remove the fourteen Phillips #0 screws.
    • Remove the fourteen Phillips #0 screws.

  9. Flip the laptop over and pull off the bottom cover. Flip the laptop over and pull off the bottom cover.
    • Flip the laptop over and pull off the bottom cover.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

scott smith

회원 가입일: 2018년 02월 12일

106 평판

안내서 1개 작성함

댓글 쓰기

조회 통계:

24 시간 전: 4

7일 전: 4

30일 전: 10

전체 시간: 282