Asus Transformer Pad Infinity Charging Port Replacement - iFixit 수리 안내서

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

소개

Replacing the charging port involves opening up the device. Prerequisites; follow the Asus Transformer Pad Infinity Teardown link up to step 6 to remove the charging port.

필요한 것

1 단계 Charging Port

Asus Transformer Pad Infinity Charging Port Replacement, Charging Port: 1 단계, 이미지 1/2

Asus Transformer Pad Infinity Charging Port Replacement, Charging Port: 1 단계, 이미지 2/2

Take off the screen and the big motherboard.

2 단계

Asus Transformer Pad Infinity Charging Port Replacement: 2 단계, 이미지 1/3

Asus Transformer Pad Infinity Charging Port Replacement: 2 단계, 이미지 2/3

Asus Transformer Pad Infinity Charging Port Replacement: 2 단계, 이미지 3/3

Disconnect the long silver ribbon connector from the screen.
Remove the orange ribbon connector with the two connections.

3 단계

Asus Transformer Pad Infinity Charging Port Replacement: 3 단계, 이미지 1/1

Flip up the piece securing the ribbon to the big motherboard and remove the ribbon from the motherboard.
Note: This will have tape covering it, make sure not to cut the ribbon or scratch any other parts if you are looking to preserve these things.

4 단계

Asus Transformer Pad Infinity Charging Port Replacement: 4 단계, 이미지 1/1

Remove the two screws holding the actual port, that goes to the outside of the device, in. This piece will be connected to the case.

5 단계

Asus Transformer Pad Infinity Charging Port Replacement: 5 단계, 이미지 1/1

Once removing the damaged charging port, put in your new part and reassemble the device and check if the new charging port works.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Allison Poh

회원 가입일: 10/20/15

549 평판

안내서 5개 작성하였습니다

배지 +6개 더

팀

UMass Dartmouth, Team 5-1, Gulbrandsen Fall 2015 UMass Dartmouth, Team 5-1, Gulbrandsen Fall 2015 회원

UMASSD-GULBRANDSEN-F15S5G1

3 회원들

안내서 10개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 1,095