주요 콘텐츠로 건너뛰기

소개

This guide will explain how to replace the back cover of this device.

부품

지정된 부품이 없습니다.

  1. Make sure the computer is turned off.
    • Make sure the computer is turned off.

    • Flip the device over so that the back cover is facing you.

  2. Remove the four 5mm Phillips #1 screws from the top of the laptop. Remove the two 6mm Phillips #1 screws from the sides of the laptop.
    • Remove the four 5mm Phillips #1 screws from the top of the laptop.

    • Remove the two 6mm Phillips #1 screws from the sides of the laptop.

    • Remove the four 2mm Phillips #1 screws from the bottom of the laptop.

  3. Use a plastic opening tool to gently pry the bottom of the laptop up. Slowly slide it along the edges, twisting it every so often to pop the bottom of the laptop out of the clips holding it in place. Use a plastic opening tool to gently pry the bottom of the laptop up. Slowly slide it along the edges, twisting it every so often to pop the bottom of the laptop out of the clips holding it in place. Use a plastic opening tool to gently pry the bottom of the laptop up. Slowly slide it along the edges, twisting it every so often to pop the bottom of the laptop out of the clips holding it in place.
    • Use a plastic opening tool to gently pry the bottom of the laptop up. Slowly slide it along the edges, twisting it every so often to pop the bottom of the laptop out of the clips holding it in place.

  4. Lift off the cover and remove the back cover from the device.
    • Lift off the cover and remove the back cover from the device.

결론

To reassemble your device, follow these instructions in reverse order.

Nicholas De La Guardia

회원 가입일: 2017년 10월 02일

208 평판

안내서 2개 작성하였습니다

USF Tampa, Team S10-G3, Thompson Fall 2017 USF Tampa, Team S10-G3, Thompson Fall 2017 회원

USFT-THOMPSON-F17S10G3

4 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 5

지난 7일: 19

지난 30일: 160

전체 시간: 722