주요 콘텐츠로 건너뛰기

Asus X202E-UH31T Headphone Jack Replacement

필요한 것

  1. Asus X202E-UH31T Headphone Jack  Replacement, Headphone Jack: 1 단계, 이미지 1/1
    • Remove the 9 1.2mm phillips head screws on the bottom of the computer using the smaller Phillips head screw driver.

  2. Asus X202E-UH31T Headphone Jack  Replacement: 2 단계, 이미지 1/1
    • Use a plastic opening tool to open the components of the laptop. In order to do this, insert the plastic opening tool in between the two covers then pry open.

  3. Asus X202E-UH31T Headphone Jack  Replacement: 3 단계, 이미지 1/1
    • Once the back is off the device, unscrew the 7 1.2 mm phillips head screws that hold the battery in place. Use the smallest (#0) phillips head screw driver

    • Once the screws holding the battery are out, use the plastic opening tool to disconnect the battery cable ribbon from the motherboard

  4. Asus X202E-UH31T Headphone Jack  Replacement: 4 단계, 이미지 1/1
    • Remove the 7 1.2mm screws holding the secondary motherboard in place. Following that undo the speaker ribbon

    • Pop off the secondary mother board using your fingers.

  5. Asus X202E-UH31T Headphone Jack  Replacement: 5 단계, 이미지 1/1
    • Desolder the headphone jack or completely replace the secondary motherboard chip.

결론

To reassemble your device, follow these instructions in reverse order.

Brandon Bloomfield

회원 가입일: 09/08/17

523 평판

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 10

전체 시간: 284