주요 콘텐츠로 건너뛰기
  1. Using a T4 Torx Screwdriver, unscrew the screws at the marked locations.
    • Using a T4 Torx Screwdriver, unscrew the screws at the marked locations.

    • Place the screws into a container as to not lose them.

  2. Using your iFixit Opening Tool, carefully slide it between the back panel.
    • Using your iFixit Opening Tool, carefully slide it between the back panel.

    • Lift the back plate of your ASUS ZenBook UX31E and place it to the side.

  3. Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  4. Disconnect the battery from the motherboard by gently pulling up and down on the connector. Disconnect the battery from the motherboard by gently pulling up and down on the connector.
    • Disconnect the battery from the motherboard by gently pulling up and down on the connector.

  5. Using the Phillips 00 Screwdriver, remove the screw from the middle and the two corners of the battery. Place the screw into a container as to not lose them.
    • Using the Phillips 00 Screwdriver, remove the screw from the middle and the two corners of the battery.

    • Place the screw into a container as to not lose them.

  6. Remove the battery Remove the battery
    • Remove the battery

결론

To reassemble your device, follow these instructions in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

Hersi Dahir

회원 가입일: 2017년 02월 02일

185 평판

안내서 1개 작성함

UW Tacoma, Team 1-2, Rose Winter 2017 UW Tacoma, Team 1-2, Rose Winter 2017 회원

UWT-ROSE-W17S1G2

4 회원들

안내서 9개 작성하였습니다

Thanks for the easy to understand guide. Cheers!

Rahul Kashelani - 답글

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 18

지난 30일: 99

전체 시간: 3,383