주요 콘텐츠로 건너뛰기

소개

Upgrade the RAM in your laptop.

부품

지정된 부품이 없습니다.

  1. Use a plastic opening tool to pry along the perimeter of the bottom panel until it can be easily removed. Remove the bottom panel from the body of the laptop. Set aside the bottom panel.
    • Use a plastic opening tool to pry along the perimeter of the bottom panel until it can be easily removed.

    • Remove the bottom panel from the body of the laptop.

    • Set aside the bottom panel.

  2. Push away the RAM retaining arms from the RAM chip. The RAM chip will spring up once the retaining arms are pushed away from the chip. Remove the RAM chip completely.
    • Push away the RAM retaining arms from the RAM chip.

    • The RAM chip will spring up once the retaining arms are pushed away from the chip.

    • Remove the RAM chip completely.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Paola

회원 가입일: 2015년 09월 17일

219 평판

안내서 1개 작성함

CSU Fullerton, Team 2-2, Bruce Fall 2015 CSU Fullerton, Team 2-2, Bruce Fall 2015 회원

CSUF-BRUCE-F15S2G2

4 회원들

안내서 6개 작성하였습니다

댓글 한 개

Replaced the 4 GB RAM module in my UX32VD with an 8 GB Timetec Hynix IC DDR3 1600MHz PC3-12800 Non ECC Unbuffered 1.35V CL11 2Rx8 Dual Rank 204 Pin SODIMM Laptop Notebook Computer Memory Ram Module using this guide. It worked like a charm. Thank you for posting the guide!

Le Zap - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 25

전체 시간: 3,970