주요 콘텐츠로 건너뛰기

소개

The START/PAUSE/RESET buttons of the Atari 5200 controller can become unresponsive due to dirty/overused connections. Opening the controller and reseating/cleaning the interfaces to these sensors can improve the button's responsiveness.

  1. Using a plastic or metal spudger, pry open the face of the button module.
    • Using a plastic or metal spudger, pry open the face of the button module.

  2. Take off the plate and the rubber buttons. Clean the exposed contacts. Reassemble by following the steps in reverse.
    • Take off the plate and the rubber buttons.

    • Clean the exposed contacts.

    • Reassemble by following the steps in reverse.

결론

Test the controller. If these step don't improve connectivity, take a look at the circuitry replacement guide.

Alan Abelson

회원 가입일: 2014년 09월 26일

233 평판

안내서 5개 작성하였습니다

USF Tampa, Team 13-1, Staggers Fall 2014 USF Tampa, Team 13-1, Staggers Fall 2014 회원

USFT-STAGGERS-F14S13G1

5 회원들

안내서 16개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 9

전체 시간: 796