이 버전에는 잘못된 편집 사항이 있을 수 있습니다. 최신 확인된 스냅샷으로 전환하십시오.
필요한 것
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Using the screwdriver and the PH1 bit, unscrew the five 10.0 mm screws on the bottom of the console.
-
-
-
이 단계는 번역되지 않았습니다. 번역을 도와주십시오
-
Unscrew the two 10.0 mm Phillips #1 screws, and gently pull back the green circuit board.
-
거의 끝나갑니다!
결승점
다른 한 분이 해당 안내서를 완성하였습니다.