Atari Flashback 2 Reset and Select Button Replacement

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

소개

If the button on an Atari Flashback 2 console is sticking or broken, then it will need to be cleaned or replaced. This guide covers the steps necessary to disassemble the console in order to access the buttons to do so.

필요한 것

1 단계 Reset or Select Button

Atari Flashback 2 Reset and Select Button Replacement, Reset or Select Button: 1 단계, 이미지 1/3

Atari Flashback 2 Reset and Select Button Replacement, Reset or Select Button: 1 단계, 이미지 2/3

Atari Flashback 2 Reset and Select Button Replacement, Reset or Select Button: 1 단계, 이미지 3/3

Using the screwdriver and the PH1 bit, unscrew the five 10.0 mm screws on the bottom of the console.
One screw is under the main sticker in the middle of the console.

번역하기

2 단계

Atari Flashback 2 Reset and Select Button Replacement: 2 단계, 이미지 3/3

Unscrew the six 9.0 mm Phillips #1 screws on the brown circuit board that correspond to the reset and select buttons.
Remove gently. The circuit board is connected by wire to the console. Removing the cable from the console case may allow more slack.

번역하기