주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Atari Lynx Battery Wire Replacement

필요한 것

  1. Atari Lynx Battery Wire Replacement, Atari Lynx: 1 단계, 이미지 1/1
    • Before disassembling your Atari Lynx, be sure the device is powered off.

    • Remove any game in the console by opening the right latch and sliding the game to the right.

  2. Atari Lynx Battery Wire Replacement: 2 단계, 이미지 1/1
    • Remove the four 35 mm Phillips #1 screws at each corner of the backside on the Atari Lynx.

    • Pinch the rear panel with your fingers and lift away from the Atari.

  3. Atari Lynx Battery Wire Replacement: 3 단계, 이미지 1/1
    • Remove the battery panel by pinching the sides with your fingers and lifting it away from the Atari.

    • Be sure not to tear any wires attached to battery panel.

  4. Atari Lynx Battery Wire Replacement: 4 단계, 이미지 1/1
    • Remove the control panel by pinching the sides with your fingers and lifting it away from the Atari.

    • Be sure not to tear the speaker wire while removing the control panel.

  5. Atari Lynx Battery Wire Replacement, Battery Wires: 5 단계, 이미지 1/1
    • Desolder both the black and red wire as shown.

    • If you need help with basic desoldering, click here.

  6. Atari Lynx Battery Wire Replacement: 6 단계, 이미지 1/1
    • Desolder the black wire as shown.

  7. Atari Lynx Battery Wire Replacement: 7 단계, 이미지 1/2 Atari Lynx Battery Wire Replacement: 7 단계, 이미지 2/2
    • Desolder the white wire and then the red wire as shown.

  8. Atari Lynx Battery Wire Replacement: 8 단계, 이미지 1/1
    • Desolder the white wire as shown in order for the battery pack to be completely removed from the device.

결론

To reassemble your device, follow these instructions in reverse order.

John Lopez

회원 가입일: 01/27/14

443 평판

안내서 4개 작성하였습니다

Cal Poly, Team 1-42, Maness Winter 2014 Cal Poly, Team 1-42, Maness Winter 2014 회원

CPSU-MANESS-W14S1G42

5 회원들

안내서 16개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 13

전체 시간: 1,704