기기를 수리하세요 커뮤니티 상점

Axess SPBT1031 Buttons Replacement

소개

This guide will be helpful for repairing the buttons in the speaker if the troubleshooting page recommends that you replace the battery. This is a necessary step when you have determined no other way to repair your current battery. Be wary of accidentally damaging other parts of the device when replacing the buttons.

필요한 것

  1. Axess SPBT1031 Buttons Replacement, Red Interface Plate: 1 단계, 이미지 1/1

    • Use a metal spudger to remove the mesh speaker covers (the side with the buttons) by wedging the narrow end into the center of the outer edge of the mesh, touching the red plate.

    편집

  2. Axess SPBT1031 Buttons Replacement: 2 단계, 이미지 1/1

    • Remove the four 5 mm screws from the red panel under the mesh using a Phillips #1 screwdriver.

    편집

  4. Axess SPBT1031 Buttons Replacement: 3 단계, 이미지 1/1

    • If the screws are difficult to remove, use a pair of tweezers to twist and pick them out.

    편집

  5. Axess SPBT1031 Buttons Replacement: 4 단계, 이미지 1/1

    • Separate the red interface plate from the black face plate by pulling them apart.

    편집

  6. Axess SPBT1031 Buttons Replacement, Buttons: 5 단계, 이미지 1/1

    • Take the red plate and the motherboard and pull apart.

    편집

  7. Axess SPBT1031 Buttons Replacement: 6 단계, 이미지 1/1

    • Push the set of buttons inward from the outside of the red plate and peel off from the inside.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 6명과 함께

Elvira Lou Evangelista

회원 가입일: 03/09/16

957 평판

안내서 6개 작성하였습니다

배지: 16

배지 +13개 더

팀

UMass Dartmouth, Team 8-6, Botvin Spring 2016 UMass Dartmouth, Team 8-6, Botvin Spring 2016 회원

UMASSD-BOTVIN-S16S8G6

3 회원들

안내서 8개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 1,583