주요 콘텐츠로 건너뛰기

소개

Fix the distorted or unclear image in your Blu Life XL.

This guide instructs you on how to remove the back cover of the phone and replace the rear camera.

부품

지정된 부품이 없습니다.

  1. Turn the device off by holding down the power button for up to 5 seconds and then tapping the "Power off" button on the screen. Remove the rear cover using your hands at the lip on the device back cover. No tools required. Remove the battery by lifting the lower edge of the battery up first.
    • Turn the device off by holding down the power button for up to 5 seconds and then tapping the "Power off" button on the screen.

    • Remove the rear cover using your hands at the lip on the device back cover. No tools required.

    • Remove the battery by lifting the lower edge of the battery up first.

  2. Remove the 12x3mm screws from the rear plate using the Phillips#000 screwdriver. Remove the 12x3mm screws from the rear plate using the Phillips#000 screwdriver.
    • Remove the 12x3mm screws from the rear plate using the Phillips#000 screwdriver.

  3. Apple Watch Kits

    Screen and battery repairs just got easier.

    지금 장보기

    Apple Watch Kits

    Screen and battery repairs just got easier.

    지금 장보기
  4. Insert the plastic prying tool in between the plastic frame and the device. Keep the phone on the surface with its screen down.
    • Insert the plastic prying tool in between the plastic frame and the device.

    • Keep the phone on the surface with its screen down.

  5. Use the plastic prying tool to gently push the rear camera out from its socket. Take the camera out and set it aside.
    • Use the plastic prying tool to gently push the rear camera out from its socket.

    • Take the camera out and set it aside.

  6. Carefully place the new camera in the camera socket. Apply a little force on the top of the camera to slide it in the socket.
    • Carefully place the new camera in the camera socket.

    • Apply a little force on the top of the camera to slide it in the socket.

    • Pop the camera in the socket and make sure its stable.

결론

To reassemble your device, follow these instructions in reverse order.

Shantanu Malhotra

회원 가입일: 2018년 02월 14일

178 평판

안내서 1개 작성함

USF Tampa, Team S2-G5, Eyestone Spring 2018 USF Tampa, Team S2-G5, Eyestone Spring 2018 회원

USFT-EYESTONE-S18S2G5

3 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 1

지난 7일: 1

지난 30일: 4

전체 시간: 129