기기를 수리하세요 커뮤니티 상점

BLU WIN HD LTE Speaker Replacement

소개

The (0.7W) speaker may need to be repaired or replaced if it is not working properly.

필요한 것

  1. BLU WIN HD LTE Speaker Replacement, Back Case: 1 단계, 이미지 1/1

    • Pry the back cover from the bottom of the phone, pulling outwards and upwards.

    번역하기

  2. BLU WIN HD LTE Speaker Replacement: 2 단계, 이미지 1/1

    • Fully remove the cover and set aside in a safe place.

    번역하기

  4. BLU WIN HD LTE Speaker Replacement, Frame Cover: 3 단계, 이미지 1/1

    • Remove all the nine 2mm screws using the JIS #00 Screwdriver.

    번역하기

  5. BLU WIN HD LTE Speaker Replacement: 4 단계, 이미지 1/1

    • Pry the frame off using the spudger pulling upwards going to different areas around the device.

    • The back cover is secured by glue. Removal could be more difficult than expected.

    번역하기

  6. BLU WIN HD LTE Speaker Replacement, Speaker: 5 단계, 이미지 1/3 BLU WIN HD LTE Speaker Replacement, Speaker: 5 단계, 이미지 2/3 BLU WIN HD LTE Speaker Replacement, Speaker: 5 단계, 이미지 3/3

    • Use the spudger to pry out the speaker from the Frame Cover.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Taelar Tritton-Bowman

회원 가입일: 09/21/18

249 평판

안내서 3개 작성하였습니다

배지: 5

배지 +2개 더

팀

University of North Texas, Team S5-G7, Thompson Fall 2018 University of North Texas, Team S5-G7, Thompson Fall 2018 회원

UNT-THOMPSON-F18S5G7

3 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 136