Skip to main content
  1. Before disassembly, unplug the device. Make sure the device was not on for the last 10 minutes, because it might still be hot.
    • Before disassembly, unplug the device.

    • Make sure the device was not on for the last 10 minutes, because it might still be hot.

    • Unscrew the two screws on the handle with the spanner screwdriver.

  2. Pull the case in opposite directions. You might need a prying tool if the black components don't come out easily.
    • Pull the case in opposite directions.

    • You might need a prying tool if the black components don't come out easily.

  3. Unscrew the remaining two screws inside the handle with the Phillips screwdriver.
    • Unscrew the remaining two screws inside the handle with the Phillips screwdriver.

  4. 아이폰 배터리 수리 키트

    Only $29.99

    Buy Now

    아이폰 배터리 수리 키트

    Only $29.99

    Buy Now
  5. Push the inner components out of the handle. Push the inner components out of the handle. Push the inner components out of the handle.
    • Push the inner components out of the handle.

  6. Locate the thermal fuse. Test the thermal fuse for continuity using the multimeter.
    • Locate the thermal fuse.

    • Test the thermal fuse for continuity using the multimeter.

    • Make sure the multimeter is set to 200 ACV and bring the probes toward thermal fuse.

    • The circuit is closed and properly functioning if the multimeter displays varying numbers.

    • The circuit is open if the multimeter displays non-varying numbers or no numbers at all.

  7. To replace the thermal fuse, use the prying tool to extract the object.
    • To replace the thermal fuse, use the prying tool to extract the object.

    • To remove it, wedge it back and forth until it comes free.

    • You don't need to take out the gold piece under the thermal fuse.

  8. Replace the old thermal fuse by a new one.
    • Replace the old thermal fuse by a new one.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Tiago

회원 가입일: 2016년 12월 05일

49 평판

안내서 1개 작성함

Does anybody know what is the small silver cylinder next to the thermal fuse? It is inline with the neutral AC from the handle switch, looks like it could be a diode or possibly a resistor, though it really resembles nothing I have seen before. My inoperable unit shows no continuity through this device either direction, so I presume it is bad….but I have no idea what to replace it with!

Richard H - 답글

댓글 쓰기

조회 통계:

지난 24시간: 4

지난 7일: 25

지난 30일: 119

전체 시간: 1,875