주요 콘텐츠로 건너뛰기

Basis B1 Band LED Screen Replacement

필요한 것

  1. Basis B1 Band LED Screen Replacement, Watch Strap: 1 단계, 이미지 1/1
    • Wedge a plastic opening tool between band contacts.

  2. Basis B1 Band LED Screen Replacement: 2 단계, 이미지 1/1
    • Push in plastic opening tool until the components click and pop out of the holder.

    • Repeat steps for other band.

  3. Basis B1 Band LED Screen Replacement, Back Plate: 3 단계, 이미지 1/1
    • Remove four 4mm screws using a PH000 screwdriver.

    • Remove back plate.

  4. Basis B1 Band LED Screen Replacement, Battery: 4 단계, 이미지 1/1
    • Use tweezers to remove elastomeric, or zebra, connector.

  5. Basis B1 Band LED Screen Replacement: 5 단계, 이미지 1/2 Basis B1 Band LED Screen Replacement: 5 단계, 이미지 2/2
    • Use the flat end of the spudger to carefully lift the battery until adhesive seal is broken.

  6. Basis B1 Band LED Screen Replacement: 6 단계, 이미지 1/1
    • Use the pointy edge of the spudger tool to detach battery leads from the circuit board.

  7. Basis B1 Band LED Screen Replacement, LED Screen: 7 단계, 이미지 1/2 Basis B1 Band LED Screen Replacement, LED Screen: 7 단계, 이미지 2/2
    • Use PH000 screw driver to remove two 6mm bracketed screws.

    • Remove bracket.

  8. Basis B1 Band LED Screen Replacement: 8 단계, 이미지 1/1
    • Use PH000 tool to remove two 4mm screws.

  9. Basis B1 Band LED Screen Replacement: 9 단계, 이미지 1/1
  10. Basis B1 Band LED Screen Replacement: 10 단계, 이미지 1/1
    • Use spudger tool to lift the clasp of LED connector strip and remove from watch case.

  11. Basis B1 Band LED Screen Replacement: 11 단계, 이미지 1/1
    • Use spudger tool to remove the LED screen from the watch case.

결론

To reassemble your device, follow these instructions in reverse order.

Kaitlyn Lee

회원 가입일: 11/06/17

518 평판

안내서 4개 작성하였습니다

IUPUI, Team S6-G1, Baechle Fall 2017 IUPUI, Team S6-G1, Baechle Fall 2017 회원

IUPUI-BAECHLE-F17S6G1

4 회원들

안내서 4개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 200