기기를 수리하세요 커뮤니티 상점

Beats Studio 2.0 Wireless Left Interior Side Panel Replacement

소개

The casing and structure of Beats by Dre Studio 2.0 over-ear headphones directly influence their sound quality. When the interior side panel is compromised, a proper seal (to one's ears) is not achievable, and ultimately sound quality is severely lessened. This guide will provide thorough instructions on how to replace the interior side paneling and restore optimal sound quality.

필요한 것

  1. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement, Left Interior Side Panel: 1 단계, 이미지 1/1

    • Use metal spudger to pry away ear cushion.

    번역하기

  2. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: 2 단계, 이미지 1/1

    • Remove ear cushion from headphones (attached by adhesive).

    번역하기

  3. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: 3 단계, 이미지 1/1

    • Remove two screws from the metal hinge using a Phillips head screwdriver to allow more motion from the speaker housing and more accessibility.

    번역하기

  4. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: 4 단계, 이미지 1/1

    • Remove five screws using a Phillips head screwdriver from speaker housing.

    번역하기

  6. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: 5 단계, 이미지 1/1

    • Pull speaker away to access second secondary housing.

    • Be careful not to stress wires and break solder points.

    번역하기

  7. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: 6 단계, 이미지 1/2 Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: 6 단계, 이미지 2/2

    • Raise center cover.

    • Remove screw from center of housing.

    번역하기

  8. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: 7 단계, 이미지 1/1

    • Pull secondary housing away gently being careful not to damage the wires.

    번역하기

  9. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: 8 단계, 이미지 1/1

    • Remove four screws using a Phillips head screwdriver to remove the third housing.

    번역하기

  10. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: 9 단계, 이미지 1/3 Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: 9 단계, 이미지 2/3 Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: 9 단계, 이미지 3/3

    • Disconnect wires gently.

    • Be gentle with the wires ensuring to pull them through with care to eliminate possible shortages.

    번역하기

  11. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: 10 단계, 이미지 1/3 Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: 10 단계, 이미지 2/3 Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: 10 단계, 이미지 3/3

    • Pass wire through new housing and reconnect wires.

    번역하기

  12. Beats Studio 2.0 Wireless Left Interior Side Panel Replacement: 11 단계, 이미지 1/1

    • Snap housing into place.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Antares Cam

회원 가입일: 02/27/18

235 평판

안내서 1개 작성함

배지: 7

배지 +4개 더

팀

colby and cameron colby and cameron 회원

Community

2 회원들

안내서 1개 작성하였습니다

댓글 2개

Thank you for your tutorial!

Jonathan Concepcion - 답글

appreciate it, fixed both side panels on my beats

mridha31 - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 17

전체 시간: 5,593