기기를 수리하세요 커뮤니티 상점

Belkin NetCam HD Lens Piece Replacement

소개

This guide will walk you through how to replace the lens piece on the NetCam.

필요한 것

  1. Belkin NetCam HD Lens Piece Replacement, Case: 1 단계, 이미지 1/1

    • Use a wrench to loosen up the stand from the back in order to hold the NetCam more comfortably.

    편집

  2. Belkin NetCam HD Lens Piece Replacement: 2 단계, 이미지 1/1

    • Work a plastic opening tool into the seam and pry the face plate away from the back panel.

    편집

  3. Belkin NetCam HD Lens Piece Replacement: 3 단계, 이미지 1/2 Belkin NetCam HD Lens Piece Replacement: 3 단계, 이미지 2/2

    • Use pressure to separate the covers.

    • When pulling the device apart, separate from the bottom up in order to avoid pulling the wiring at the top apart.

    편집

  4. Belkin NetCam HD Lens Piece Replacement, Front Casing: 4 단계, 이미지 1/1

    • Carefully use your fingers to gently pull out the white attachment from the tan colored part.

    편집

  6. Belkin NetCam HD Lens Piece Replacement, Speaker: 5 단계, 이미지 1/2 Belkin NetCam HD Lens Piece Replacement, Speaker: 5 단계, 이미지 2/2

    • Use a Phillips #0 screwdriver to take out the two 1.2 mm screws on the board.

    편집

  7. Belkin NetCam HD Lens Piece Replacement: 6 단계, 이미지 1/3 Belkin NetCam HD Lens Piece Replacement: 6 단계, 이미지 2/3 Belkin NetCam HD Lens Piece Replacement: 6 단계, 이미지 3/3

    • With your fingers, pull the circuit board out of the back casing.

    • When pulling the board up be sure to do so carefully so you do not break the cord which is attached on the back side.

    편집

  8. Belkin NetCam HD Lens Piece Replacement: 7 단계, 이미지 1/2 Belkin NetCam HD Lens Piece Replacement: 7 단계, 이미지 2/2

    • Gently pull the speaker out of the holder from the back of the cover.

    편집

  9. Belkin NetCam HD Lens Piece Replacement: 8 단계, 이미지 1/1

    • The speaker wires are attached with the board. It can be unattached gently by pulling out the white attachment from the port.

    편집

  10. Belkin NetCam HD Lens Piece Replacement, Lens Piece: 9 단계, 이미지 1/2 Belkin NetCam HD Lens Piece Replacement, Lens Piece: 9 단계, 이미지 2/2

    • Flip the circuit board to the back side.

    • Fold down the tape with your finger.

    • With the Phillips #0 screwdriver, unscrew the two 1.2 mm screws.

    편집

  11. Belkin NetCam HD Lens Piece Replacement: 10 단계, 이미지 1/2 Belkin NetCam HD Lens Piece Replacement: 10 단계, 이미지 2/2

    • Flip the circuit board back to the other side.

    • Unscrew the screw with a Phillips #0 screw driver.

    편집

  12. Belkin NetCam HD Lens Piece Replacement: 11 단계, 이미지 1/1

    • Slide the attached piece from the lens holder device.

    편집

  13. Belkin NetCam HD Lens Piece Replacement: 12 단계, 이미지 1/2 Belkin NetCam HD Lens Piece Replacement: 12 단계, 이미지 2/2

    • Use the tweezers to pull the white attachment out from the port a little.

    • Then, take your fingers and gently pull the white attachment out from the tan port.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 5명과 함께

Destinie DiazVerdejo

회원 가입일: 10/04/16

805 평판

안내서 7개 작성하였습니다

배지: 12

배지 +9개 더

팀

USF Tampa, Team 3-5, Sullivan Fall 2016 USF Tampa, Team 3-5, Sullivan Fall 2016 회원

USFT-SULLIVAN-F16S3G5

4 회원들

안내서 14개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 5

전체 시간: 1,001