기기를 수리하세요 커뮤니티 상점

Bem Wireless HL2739B Speaker Replacement

소개

Actions speak louder than words especially when your speaker's broken. Speak up and follow this guide.

필요한 것

  1. Bem Wireless HL2739B Speaker Replacement, Speaker Battery: 1 단계, 이미지 1/1

    • Peel the rubber cover back from the corner of the speaker to reveal the screw.

    • Repeat for the three remaining corners.

    편집

  2. Bem Wireless HL2739B Speaker Replacement: 2 단계, 이미지 1/3 Bem Wireless HL2739B Speaker Replacement: 2 단계, 이미지 2/3 Bem Wireless HL2739B Speaker Replacement: 2 단계, 이미지 3/3

    • Use the J1 bit attached to the screwdriver to remove the four 10mm screws from the bottom of the speaker.

    편집

  3. Bem Wireless HL2739B Speaker Replacement: 3 단계, 이미지 1/1

    • Lift the bottom cover away from the rest of the speaker.

    • There are wires connecting the battery and cover to the rest of the speaker. Be careful when removing the base cover.

    • Using the tweezers, pull the wires from the speaker's internal chip.

    • Be careful not to damage the chip when you remove the wires.

    • It will likely require soldering to reassemble the speaker after this step.

    편집

  4. Bem Wireless HL2739B Speaker Replacement: 4 단계, 이미지 1/1

    • Using a plastic opening tool, gently pry the battery from the metal base.

    편집

  6. Bem Wireless HL2739B Speaker Replacement: 5 단계, 이미지 1/1

    • Using tweezers, pull the wires from the metal base connection.

    편집

  7. Bem Wireless HL2739B Speaker Replacement, Speaker Motherboard: 6 단계, 이미지 1/2 Bem Wireless HL2739B Speaker Replacement, Speaker Motherboard: 6 단계, 이미지 2/2

    • Unscrew the four 10mm screws from the motherboard.

    편집

  8. Bem Wireless HL2739B Speaker Replacement: 7 단계, 이미지 1/2 Bem Wireless HL2739B Speaker Replacement: 7 단계, 이미지 2/2

    • Using tweezers, remove the blue/white and red/black wires from motherboard.

    편집

  9. Bem Wireless HL2739B Speaker Replacement: 8 단계, 이미지 1/2 Bem Wireless HL2739B Speaker Replacement: 8 단계, 이미지 2/2

    • Gently re-position the motherboard so you can access the bus wire connected to the speaker.

    • Remove bus wire from the speaker and lift out the motherboard.

    편집

  10. Bem Wireless HL2739B Speaker Replacement, Speaker: 9 단계, 이미지 1/1

    • Using tweezers remove excess glue that may be covering the screw holes of the speaker's driver.

    편집

  11. Bem Wireless HL2739B Speaker Replacement: 10 단계, 이미지 1/2 Bem Wireless HL2739B Speaker Replacement: 10 단계, 이미지 2/2

    • Remove the four 10mm screws from speaker's base.

    편집

  12. Bem Wireless HL2739B Speaker Replacement: 11 단계, 이미지 1/2 Bem Wireless HL2739B Speaker Replacement: 11 단계, 이미지 2/2

    • Using the metal spudger, pry up on the speaker's base.

    • This will require a moderate amount of force.

    • Pull the wire from the speaker's driver's base from the hole it was in.

    편집

  13. Bem Wireless HL2739B Speaker Replacement: 12 단계, 이미지 1/2 Bem Wireless HL2739B Speaker Replacement: 12 단계, 이미지 2/2

    • Remove the two 5mm screws from the speaker.

    • Lift the driver from the speaker.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Ryan McQueeney

회원 가입일: 02/28/17

446 평판

안내서 4개 작성하였습니다

배지: 6

배지 +3개 더

팀

USF Tampa, Team S2-G4, Nance Spring 2017 USF Tampa, Team S2-G4, Nance Spring 2017 회원

USFT-NANCE-S17S2G4

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 6

전체 시간: 989