기기를 수리하세요 커뮤니티 상점

Bissell Bolt ION 2-in-1 Cordless Brush Replacement

소개

This guide will detail each step necessary to replace the brush roll on a Bissell Bolt ION 2-in-1 Cordless vacuum.

  1. Bissell Bolt ION 2-in-1 Cordless Brush Replacement, Brush Roll: 1 단계, 이미지 1/3 Bissell Bolt ION 2-in-1 Cordless Brush Replacement, Brush Roll: 1 단계, 이미지 2/3 Bissell Bolt ION 2-in-1 Cordless Brush Replacement, Brush Roll: 1 단계, 이미지 3/3

    • Push the release button on the back side of the device near the swivel head, to detach the swivel for convenient access to the brush roll.

    편집

  3. Bissell Bolt ION 2-in-1 Cordless Brush Replacement: 2 단계, 이미지 1/3 Bissell Bolt ION 2-in-1 Cordless Brush Replacement: 2 단계, 이미지 2/3 Bissell Bolt ION 2-in-1 Cordless Brush Replacement: 2 단계, 이미지 3/3

    • The guard notch will automatically be down in the locked position.

    • Slide the guard notch to the unlocked position.

    편집

  4. Bissell Bolt ION 2-in-1 Cordless Brush Replacement: 3 단계, 이미지 1/2 Bissell Bolt ION 2-in-1 Cordless Brush Replacement: 3 단계, 이미지 2/2

    • Lift up the latch to the right of the guard notch to access the brush.

    • While holding up the latch remove the brush.

    • Hold up latch to place new brush roll back into place.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Benjamin Bautista

회원 가입일: 09/11/17

140 평판

안내서 1개 작성함

배지: 6

배지 +3개 더

팀

CSU Fullerton, Team S1-G3, Bruce Fall 2017 CSU Fullerton, Team S1-G3, Bruce Fall 2017 회원

CSUF-BRUCE-F17S1G3

3 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 9

전체 시간: 707