기기를 수리하세요 커뮤니티 상점

Bissell Bolt ION 2-in-1 Cordless Release Button Replacement

소개

This guide will provide steps on how to replace the release button.

필요한 것

  1. Bissell Bolt ION 2-in-1 Cordless Release Button Replacement, Release Button: 1 단계, 이미지 1/2 Bissell Bolt ION 2-in-1 Cordless Release Button Replacement, Release Button: 1 단계, 이미지 2/2

    • Grab the handle of the handheld vacuum.

    • With great force, remove the handheld vacuum from the entire unit.

    편집

  2. Bissell Bolt ION 2-in-1 Cordless Release Button Replacement: 2 단계, 이미지 1/2 Bissell Bolt ION 2-in-1 Cordless Release Button Replacement: 2 단계, 이미지 2/2

    • Remove the two 4.4cm screws using the 2.0 screw.

    • Remove the two 4.4cm screws using the 2.0 screw.

    편집

  4. Bissell Bolt ION 2-in-1 Cordless Release Button Replacement: 3 단계, 이미지 1/3 Bissell Bolt ION 2-in-1 Cordless Release Button Replacement: 3 단계, 이미지 2/3 Bissell Bolt ION 2-in-1 Cordless Release Button Replacement: 3 단계, 이미지 3/3

    • Using the metal spudger, insert and lift up to remove the frame from the body.

    • Move along the line and repeat on the other side.

    편집

  5. Bissell Bolt ION 2-in-1 Cordless Release Button Replacement: 4 단계, 이미지 1/2 Bissell Bolt ION 2-in-1 Cordless Release Button Replacement: 4 단계, 이미지 2/2

    • When placing new button in make sure the bottom end goes in first.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Valeria Soto

회원 가입일: 09/11/17

342 평판

안내서 2개 작성하였습니다

배지: 8

배지 +5개 더

팀

CSU Fullerton, Team S1-G3, Bruce Fall 2017 CSU Fullerton, Team S1-G3, Bruce Fall 2017 회원

CSUF-BRUCE-F17S1G3

3 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 9

전체 시간: 441