기기를 수리하세요 커뮤니티 상점

Bissell OptiClean Cyclonic Vacuum Flex Hose Replacement

소개

A damaged flex hose on your Bissell OptiClean Cyclonic Vacuum could be a reason that suction power is lost or low. If this is the case, it will be necessary to replace the damaged flex hose with a new one. This guide will teach you how to detach and replace the flex hose with handle on your Bissell OptiClean Cyclonic Vacuum.

  1. Bissell OptiClean Cyclonic Vacuum Flex Hose Replacement, Flex Hose with Handle: 1 단계, 이미지 1/2 Bissell OptiClean Cyclonic Vacuum Flex Hose Replacement, Flex Hose with Handle: 1 단계, 이미지 2/2

    • Grab hold of both the flex hose handle and the extension wand.

    • Pull straight out to detach the handle from the extension wand.

    편집

  3. Bissell OptiClean Cyclonic Vacuum Flex Hose Replacement: 2 단계, 이미지 1/1

    • Locate the lock clip on the other end of the flex hose.

    편집

  4. Bissell OptiClean Cyclonic Vacuum Flex Hose Replacement: 3 단계, 이미지 1/2 Bissell OptiClean Cyclonic Vacuum Flex Hose Replacement: 3 단계, 이미지 2/2

    • Hold down the lock clip to unlock the flex hose from the vacuum.

    • Remove the flex hose from the vacuum.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Devin Rojo-Cagadoc

회원 가입일: 01/18/18

97 평판

안내서 1개 작성함

배지: 2

팀

Cal Poly, Team S12-G1, Banghart Winter 2018 Cal Poly, Team S12-G1, Banghart Winter 2018 회원

CPSU-BANGHART-W18S12G1

5 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 4

전체 시간: 263