기기를 수리하세요 커뮤니티 상점

Bissell OptiClean Cyclonic Vacuum Filter Replacements

소개

This guide covers how to take out all the filters on the vacuum to either clean or replace them. All steps are accompanied by photos to help you through the process.

필요한 것

  1. Bissell OptiClean Cyclonic Vacuum Filter Replacements, Flex Hose with Handle: 1 단계, 이미지 1/2 Bissell OptiClean Cyclonic Vacuum Filter Replacements, Flex Hose with Handle: 1 단계, 이미지 2/2

    • Grab hold of both the flex hose handle and the extension wand.

    • Pull straight out to detach the handle from the extension wand.

    편집

  2. Bissell OptiClean Cyclonic Vacuum Filter Replacements: 2 단계, 이미지 1/1

    • Locate the lock clip on the other end of the flex hose.

    편집

  3. Bissell OptiClean Cyclonic Vacuum Filter Replacements: 3 단계, 이미지 1/2 Bissell OptiClean Cyclonic Vacuum Filter Replacements: 3 단계, 이미지 2/2

    • Hold down the lock clip to unlock the flex hose from the vacuum.

    • Remove the flex hose from the vacuum.

    편집

  5. Bissell OptiClean Cyclonic Vacuum Filter Replacements, Filters: 4 단계, 이미지 1/3 Bissell OptiClean Cyclonic Vacuum Filter Replacements, Filters: 4 단계, 이미지 2/3 Bissell OptiClean Cyclonic Vacuum Filter Replacements, Filters: 4 단계, 이미지 3/3

    • After removing hose, place vacuum on back and unclip the top compartment.

    • Open the compartment.

    • Pull the dirt collection box out of the vacuum.

    편집

  6. Bissell OptiClean Cyclonic Vacuum Filter Replacements: 5 단계, 이미지 1/3 Bissell OptiClean Cyclonic Vacuum Filter Replacements: 5 단계, 이미지 2/3 Bissell OptiClean Cyclonic Vacuum Filter Replacements: 5 단계, 이미지 3/3

    • Place dirt collection box to the side.

    • Locate the Pre-Motor Filter.

    • Pull the filter out by grabbing the pull tab on top.

    편집

  7. Bissell OptiClean Cyclonic Vacuum Filter Replacements: 6 단계, 이미지 1/3 Bissell OptiClean Cyclonic Vacuum Filter Replacements: 6 단계, 이미지 2/3 Bissell OptiClean Cyclonic Vacuum Filter Replacements: 6 단계, 이미지 3/3

    • Turn vacuum around and locate the filter cover on the bottom.

    • Place fingers in the opening and pull off the filter cover.

    • Place fingers on each tab on the Post-Motor HEPA Media Filter and pull out.

    편집

  8. Bissell OptiClean Cyclonic Vacuum Filter Replacements: 7 단계, 이미지 1/3 Bissell OptiClean Cyclonic Vacuum Filter Replacements: 7 단계, 이미지 2/3 Bissell OptiClean Cyclonic Vacuum Filter Replacements: 7 단계, 이미지 3/3

    • Take filter out to clean or replace.

    • To clean Dirt Collection Box, unlatch lid and take off.

    편집

  9. Bissell OptiClean Cyclonic Vacuum Filter Replacements: 8 단계, 이미지 1/3 Bissell OptiClean Cyclonic Vacuum Filter Replacements: 8 단계, 이미지 2/3 Bissell OptiClean Cyclonic Vacuum Filter Replacements: 8 단계, 이미지 3/3

    • Flip Dirt Collection Box over and locate the push tab.

    • Push the Dirt Cup HEPA Media Filter up to take it off.

    • Picture 3 Shows all the filters taken out of the vacuum.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Austin Marshall

회원 가입일: 01/18/18

130 평판

안내서 1개 작성함

배지: 5

배지 +2개 더

팀

Cal Poly, Team S12-G1, Banghart Winter 2018 Cal Poly, Team S12-G1, Banghart Winter 2018 회원

CPSU-BANGHART-W18S12G1

5 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 3

30일 전: 15

전체 시간: 727