기기를 수리하세요 커뮤니티 상점

Bissell Powerglide Cordless Release Button Replacement

소개

This guide explains how to replace the release button if it is broken or not working.

필요한 것

  1. Bissell Powerglide Cordless Release Button Replacement, Release Button: 1 단계, 이미지 1/2 Bissell Powerglide Cordless Release Button Replacement, Release Button: 1 단계, 이미지 2/2

    • Press the release button while pulling up on the head of the vacuum to remove the head.

    편집

  2. Bissell Powerglide Cordless Release Button Replacement: 2 단계, 이미지 1/1

    • Using a Phillips head screwdriver, unscrew the four screws holding the panel to the shaft of the vacuum.

    편집

  4. Bissell Powerglide Cordless Release Button Replacement: 3 단계, 이미지 1/2 Bissell Powerglide Cordless Release Button Replacement: 3 단계, 이미지 2/2

    • Pry the panel up using a spudger and pull up firmly just enough to see the clips of wire on the sides.

    편집

  5. Bissell Powerglide Cordless Release Button Replacement: 4 단계, 이미지 1/1

    • Remove the wire clips on both sides of the shaft.

    편집

  6. Bissell Powerglide Cordless Release Button Replacement: 5 단계, 이미지 1/1

    • Pull the top piece out of the shaft.

    편집

  7. Bissell Powerglide Cordless Release Button Replacement: 6 단계, 이미지 1/3 Bissell Powerglide Cordless Release Button Replacement: 6 단계, 이미지 2/3 Bissell Powerglide Cordless Release Button Replacement: 6 단계, 이미지 3/3

    • Pinch the two pairs of plastic catches (circled in the picture) to release the button.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Khanh Fleshman

회원 가입일: 01/28/18

133 평판

안내서 1개 작성함

배지: 3

팀

CPSU-BANGHART-W18S21G2 CPSU-BANGHART-W18S21G2 회원

Community

1 회원

안내서 1개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 3

전체 시간: 149