물건을 수리하세요 커뮤니티 상점

Bissell Spinwave Pet Brush Guard Replacement

소개

This guide will walk you through the process of replacing a cracked or malfunctioning brush guard on your BISSELL SpinWave Pet. The brush guard is a key component responsible for protecting the brush, allowing the device to pick up debris while remaining in place.

If your brush guard is damaged or not functioning properly, follow this guide to replace it. Before you begin this repair, ensure your BISSELL SpinWave Pet is turned off and disconnected from any power source.

  1. Bissell Spinwave Pet Brush Guard Replacement, Dirt Bin: 1 단계, 이미지 1개 중 1개

    • Ensure the Bissell SpinWave is turned off and disconnected from any power source.

    편집

  2. Bissell Spinwave Pet Brush Guard Replacement: 2 단계, 이미지 1개 중 1개

    • Press the white button on top of the dirt bin to release it.

    편집

  3. Bissell Spinwave Pet Brush Guard Replacement: 3 단계, 이미지 1개 중 1개

    • While holding the white button on top, lift the dirt bin out of the Bissell SpinWave Pet.

    편집

  4. Bissell Spinwave Pet Brush Guard Replacement, Brush Gaurd: 4 단계, 이미지 2개 중 1개 Bissell Spinwave Pet Brush Guard Replacement, Brush Gaurd: 4 단계, 이미지 2개 중 2개

    • flip over Bissell Spinwave pet.

    • Bush down on both grey buttons.

    편집

  5. Bissell Spinwave Pet Brush Guard Replacement: 5 단계, 이미지 1개 중 1개

    • Lift up brush guard while squeezing

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

3다른 기여자 명과 함께

Dube Aniagu

회원 가입일: 10/22/24

403 평판

안내서 3개를 작성함

배지: 4

배지 +1개 더

팀

UMass Dartmouth, Team 3-5, Santin Fall 2024 UMass Dartmouth, Team 3-5, Santin Fall 2024 회원

UMASSD-SANTIN-F24S3G5

4 회원들

안내서 5개를 작성함

0가이드 댓글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 3

전체 시간: 113