Bissell Spinwave Pet Side Brush Replacement - iFixit 수리 안내서

소개

For this robot vacuum, the side brushes sweep dust and debris from corners and edges that the main brush is not able to reach. If the side brushes become worn out after prolonged use, you are able to remove and replace them. This guide will show you how to replace the side brushes on your Bissell Spinwave Pet (model 3347).

Before you begin this repair, make sure to turn off your vacuum and remove it from the charging dock or charger.

필요한 것

1 단계 Side Brush

Bissell Spinwave Pet Side Brush Replacement, Side Brush: 1 단계, 이미지 2개 중 1개

Bissell Spinwave Pet Side Brush Replacement, Side Brush: 1 단계, 이미지 2개 중 2개

Place the Bissell Spinwave pet upside down.

2 단계

Bissell Spinwave Pet Side Brush Replacement: 2 단계, 이미지 1개 중 1개

Use a Phillips #00 screwdriver to remove both screws.

3 단계

Bissell Spinwave Pet Side Brush Replacement: 3 단계, 이미지 2개 중 1개

Bissell Spinwave Pet Side Brush Replacement: 3 단계, 이미지 2개 중 2개

Remove the two secondary brushes.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

3다른 기여자 명과 함께

Steven Schayer

회원 가입일: 10/24/24

293 평판

안내서 2개를 작성함

배지 +1개 더

팀

UMass Dartmouth, Team 3-5, Santin Fall 2024 UMass Dartmouth, Team 3-5, Santin Fall 2024 회원

UMASSD-SANTIN-F24S3G5

4 회원들

안내서 5개를 작성함

0가이드 댓글

조회 통계:

지난 24시간: 0

지난 7일: 3

지난 30일: 6

전체 시간: 110