기기를 수리하세요 커뮤니티 상점

Bissell Swivel Rewind Pet Vacuum Belt Replacement

소개

After using your Bissell Swivel Rewind Pet vacuum cleaner for awhile, the vacuum brush might stop spinning. In most cases, the problem comes from the eruption of the belt. The motor pulley of the vacuum cleaner makes the belt turn, which allows the brush roll to turn and do the cleaning. When the belt brakes, the vacuum cleaner is not useful anymore. Use this guide for to replace the belt of your Bissell Swivel Rewind Pet Vacuum.

Before starting this guide, make sure to have the new belt, and to turn off and unplug your vacuum.

필요한 것

  1. Bissell Swivel Rewind Pet Vacuum Belt Replacement, Belt: 1 단계, 이미지 1/3 Bissell Swivel Rewind Pet Vacuum Belt Replacement, Belt: 1 단계, 이미지 2/3 Bissell Swivel Rewind Pet Vacuum Belt Replacement, Belt: 1 단계, 이미지 3/3

    • Using your Phillips #2 screwdriver, remove the six 17.5 mm screws on the front panel that holds the brush roll in place.

    편집

  2. Bissell Swivel Rewind Pet Vacuum Belt Replacement: 2 단계, 이미지 1/3 Bissell Swivel Rewind Pet Vacuum Belt Replacement: 2 단계, 이미지 2/3 Bissell Swivel Rewind Pet Vacuum Belt Replacement: 2 단계, 이미지 3/3

    • Pull the front panel to remove it and access the brush roll and the broken belt.

    편집

  4. Bissell Swivel Rewind Pet Vacuum Belt Replacement: 3 단계, 이미지 1/3 Bissell Swivel Rewind Pet Vacuum Belt Replacement: 3 단계, 이미지 2/3 Bissell Swivel Rewind Pet Vacuum Belt Replacement: 3 단계, 이미지 3/3

    • Remove the broken belt.

    • Hold the brush roll on both ends and pull it outward to remove it.

    편집

  5. Bissell Swivel Rewind Pet Vacuum Belt Replacement: 4 단계, 이미지 1/2 Bissell Swivel Rewind Pet Vacuum Belt Replacement: 4 단계, 이미지 2/2

    • Put the new belt on the metal that makes the belt turn. It is located close to the rear tire.

    편집

  6. Bissell Swivel Rewind Pet Vacuum Belt Replacement: 5 단계, 이미지 1/2 Bissell Swivel Rewind Pet Vacuum Belt Replacement: 5 단계, 이미지 2/2

    • Put the new belt on the brush roll where there is a black spot.

    편집

  7. Bissell Swivel Rewind Pet Vacuum Belt Replacement: 6 단계, 이미지 1/2 Bissell Swivel Rewind Pet Vacuum Belt Replacement: 6 단계, 이미지 2/2

    • Pull the brush roll upward and align it in its original spot.

    • This may take some force.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 1명과 함께

Kouassi Kouassi

회원 가입일: 07/23/20

187 평판

안내서 1개 작성함

배지: 6

배지 +3개 더

팀

UW Tacoma, Team S1-G6, Cardinal Summer 2020 UW Tacoma, Team S1-G6, Cardinal Summer 2020 회원

UWT-CARDINAL-SU20S1G6

1 회원

안내서 1개 작성하였습니다

댓글 한 개

Ty but where do I buy the belt??

hysell64@gmail.com - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 7

30일 전: 47

전체 시간: 3,444