기기를 수리하세요 커뮤니티 상점

Bissell Zing 2156A Rear Wheel Replacement

소개

Like most canister vacuums, this unit uses wheels to help keep it mobile for a variety of floor types. The Bissell Zing 2156A uses three total wheels: one swivel wheel in front and two side wheels. If the vacuum's wheels are stuck, replacing these can be a great way to get it going again.

Hair or other debris can get behind these wheels, and by their nature, these wheels are often right where messes are, so gloves might be advisable. Otherwise, this is an easy repair!

  1. Bissell Zing 2156A Rear Wheel Replacement, Rear Wheel: 1 단계, 이미지 1/1

    • Remove the dust tank, so the vacuum can lie upside down easily.

    • Press the grey button while pulling up.

    번역하기

  3. Bissell Zing 2156A Rear Wheel Replacement: 2 단계, 이미지 1/1

    • Flip the vacuum upside down.

    번역하기

  4. Bissell Zing 2156A Rear Wheel Replacement: 3 단계, 이미지 1/3 Bissell Zing 2156A Rear Wheel Replacement: 3 단계, 이미지 2/3 Bissell Zing 2156A Rear Wheel Replacement: 3 단계, 이미지 3/3

    • Place your hand inside between the wheel and vacuum and pry the wheel off.

    • Repeat with the other side.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 4명과 함께

Terrance

회원 가입일: 02/14/24

280 평판

안내서 3개 작성하였습니다

배지: 5

배지 +2개 더

팀

University of Memphis, Team 3-4, Sneed Spring 2024 University of Memphis, Team 3-4, Sneed Spring 2024 회원

UM-SNEED-S24S3G4

4 회원들

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 9

전체 시간: 69