기기를 수리하세요 커뮤니티 상점

Black and Decker 15.6V Filter Replacement

소개

Getting to the air filter of a Black and Decker Dust-buster is fairly simple. It is a tool-less process, that can be completed in a short time. Despite the simplicity of this procedure, it is imperative that a user either replaces or cleans the dust filter regularly. This act of replacing the filter will keep the unit functioning at its max capacity, as well as prevent excess wear on the vacuums components.

필요한 것

  1. Black and Decker 15.6V Filter Replacement, Filter Unit Replacement: 1 단계, 이미지 1/2 Black and Decker 15.6V Filter Replacement, Filter Unit Replacement: 1 단계, 이미지 2/2

    • Disconnect the vacuum's nozzle by pressing the blue buttons on the side of the nozzle.

    번역하기

  2. Black and Decker 15.6V Filter Replacement: 2 단계, 이미지 1/2 Black and Decker 15.6V Filter Replacement: 2 단계, 이미지 2/2

    • Disconnect the dustbin from the rest of the vacuum by pressing the blue button on the vacuum's handle.

    번역하기

  4. Black and Decker 15.6V Filter Replacement: 3 단계, 이미지 1/2 Black and Decker 15.6V Filter Replacement: 3 단계, 이미지 2/2

    • Remove the entire dustbin.

    • Empty the bin into a trash can if it has debris.

    • Pull the filter unit out from the bottom of the dustbin.

    번역하기

  5. Black and Decker 15.6V Filter Replacement: 4 단계, 이미지 1/3 Black and Decker 15.6V Filter Replacement: 4 단계, 이미지 2/3 Black and Decker 15.6V Filter Replacement: 4 단계, 이미지 3/3

    • With the filter unit in your hand give the dark grey plastic shroud a quarter clockwise turn and remove the shroud exposing the filter.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Jordon Borges

회원 가입일: 03/06/17

1,053 평판

안내서 2개 작성하였습니다

배지: 13

배지 +10개 더

팀

UMass Dartmouth, Team S6-G1, Isaacson Spring 2017 UMass Dartmouth, Team S6-G1, Isaacson Spring 2017 회원

UMASSD-ISAACSON-S17S6G1

4 회원들

안내서 9개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 3

7일 전: 8

30일 전: 16

전체 시간: 1,597