기기를 수리하세요 커뮤니티 상점

Black and Decker BDH9600CHV Power Switch Replacement

소개

Sometimes, the power switch can become jammed or broken. This guide will show how to take the housing apart and replace the power switch within the Black and Decker BDH9600CHV.

One thing to be aware of would be that the screws are deep within the outside of the housing so an extender could be needed to reach the screws

필요한 것

  1. Black and Decker BDH9600CHV Power Switch Replacement, Power Switch: 1 단계, 이미지 1/3 Black and Decker BDH9600CHV Power Switch Replacement, Power Switch: 1 단계, 이미지 2/3 Black and Decker BDH9600CHV Power Switch Replacement, Power Switch: 1 단계, 이미지 3/3

    • To remove the filter and housing, press the green button labeled "Filter".

    편집

  2. Black and Decker BDH9600CHV Power Switch Replacement: 2 단계, 이미지 1/1

    • Unscrew and remove all 5 screws using the Phillips 0 screw bit. Each screw is 17.5 mm long.

    편집

  4. Black and Decker BDH9600CHV Power Switch Replacement: 3 단계, 이미지 1/2 Black and Decker BDH9600CHV Power Switch Replacement: 3 단계, 이미지 2/2

    • Pull the housing apart.

    • When you pull the housing apart, pieces may fall out. Be sure to track of the parts and where they go.

    • Remove the switch by pulling it out.

    편집

  5. Black and Decker BDH9600CHV Power Switch Replacement: 4 단계, 이미지 1/2 Black and Decker BDH9600CHV Power Switch Replacement: 4 단계, 이미지 2/2

    • Replace the new switch by sliding the replacement switch onto the top of the switch mechanism located on the motor.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Ivette Muzquiz

회원 가입일: 11/06/17

349 평판

안내서 3개 작성하였습니다

배지: 6

배지 +3개 더

팀

IUPUI, Team S1-G4, Harley Fall 2017 IUPUI, Team S1-G4, Harley Fall 2017 회원

IUPUI-HARLEY-F17S1G4

3 회원들

안내서 3개 작성하였습니다

댓글 한 개

My switch with up & down button box like

Fernando Palacios - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 10

전체 시간: 1,125