소개

This installation guide will help you separate the blades from the blender jar. Once separated, you can successfully install replacements blades or to check for any malfunctions with the blades.

  1. Make sure the blender is turned off and unplugged from all power.
    • Make sure the blender is turned off and unplugged from all power.

    • Remove the glass jar from the base of the blender.

    댓글 쓰기

  2. Remove the top lid from the blender jar.
    • Remove the top lid from the blender jar.

    댓글 쓰기

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Twist the plastic base of the jar counterclockwise to remove it from the glass upper half.

    • Take care not to cut yourself on the blades.

    댓글 쓰기

    • Lift the rubber washer straight up to remove it from the blade assembly.

    • Take care not to cut yourself on the blades.

    댓글 쓰기

    • Lift the blades from the bottom cap.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Andrew

회원 가입일: 2012년 10월 04일

170 평판

안내서 4개 작성하였습니다

Cal Poly, Team 6-34, Regan Fall 2012 Cal Poly, Team 6-34, Regan Fall 2012 회원

CPSU-REGAN-F12S6G34

4 회원들

안내서 6개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 3

지난 30일: 17

전체 시간: 3,081