기기를 수리하세요 커뮤니티 상점

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Black and Decker BL3000S Motor Fan Replacement

소개

Upon completion of this guide, you can successfully install and replace the motor fan for you blender.

필요한 것

  1. Black and Decker BL3000S Motor Fan Replacement, Blender Base: 1 단계, 이미지 1/2 Black and Decker BL3000S Motor Fan Replacement, Blender Base: 1 단계, 이미지 2/2

    • Before disassembling the blender base, make sure the blender disconnected from any power outlet.

    • Lift the jar straight up from the base without tilting the jar.

    번역하기

  2. Black and Decker BL3000S Motor Fan Replacement: 2 단계, 이미지 1/1

    • Remove the top three 1/4 inch base screws using a Philip's head screwdriver.

    번역하기

  3. Black and Decker BL3000S Motor Fan Replacement: 3 단계, 이미지 1/2 Black and Decker BL3000S Motor Fan Replacement: 3 단계, 이미지 2/2

    • Remove the two base leg covers next to the power cord using pliers or a flat-head screwdriver.

    • This provides access to the base screws beneath.

    번역하기

  5. Black and Decker BL3000S Motor Fan Replacement: 4 단계, 이미지 1/1

    • Remove the following screws that secure the top and bottom halves of the base.

    • One 1/4 Phillips screw

    • One TA-20 screw

    • Both screwdrivers must have a minimum of a three inch shank (length).

    • Screwdrivers with extenders will not fit down the access holes.

    번역하기

  6. Black and Decker BL3000S Motor Fan Replacement: 5 단계, 이미지 1/1

    • Lift the top half of the base from the bottom half of the base to reveal the internal mechanism.

    번역하기

  7. Black and Decker BL3000S Motor Fan Replacement, Motor Fan: 6 단계, 이미지 1/2 Black and Decker BL3000S Motor Fan Replacement, Motor Fan: 6 단계, 이미지 2/2

    • Using pliers, remove the top nut from the fan and remove the washer.

    • Use a small towel to hold the fan in place. This makes taking off the nut easier to do.

    번역하기

  8. Black and Decker BL3000S Motor Fan Replacement: 7 단계, 이미지 1/1

    • Lift the fan blades from the blender base.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Andrew

회원 가입일: 10/04/12

209 평판

안내서 4개 작성하였습니다

배지: 10

배지 +7개 더

팀

Cal Poly, Team 6-34, Regan Fall 2012 Cal Poly, Team 6-34, Regan Fall 2012 회원

CPSU-REGAN-F12S6G34

4 회원들

안내서 6개 작성하였습니다

댓글 한 개

mon mixeur a montre des itincelles et de la fumeé quel étape puis suivre pour le réparer

abdelkarim hassi - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 15

30일 전: 36

전체 시간: 4,414