기기를 수리하세요 커뮤니티 상점

Black and Decker DustBuster 15.6V Nozzle Brush Replacement

소개

The nozzle brush located on the end of shaft may break off during the cleaning process. Replacing the brush is as easy as breaking it off.

필요한 것

  1. Black and Decker DustBuster 15.6V Nozzle Brush Replacement, Nozzle Brush: 1 단계, 이미지 1/1

    • Lift Nozzle Brush until it clicks into fully erect position.

    번역하기

  2. Black and Decker DustBuster 15.6V Nozzle Brush Replacement: 2 단계, 이미지 1/1

    • Apply a gentle, equal pressure outward, to the inside of both brush legs.

    번역하기

  4. Black and Decker DustBuster 15.6V Nozzle Brush Replacement: 3 단계, 이미지 1/1

    • Remove one of the leg prongs from the hole it is inserted into.

    번역하기

  5. Black and Decker DustBuster 15.6V Nozzle Brush Replacement: 4 단계, 이미지 1/1

    • Rotate the free leg forwards or backwards from the hole.

    • This relieves the pressure from the inside of the legs allowing you to freely remove the last leg from its hole.

    번역하기

  6. Black and Decker DustBuster 15.6V Nozzle Brush Replacement: 5 단계, 이미지 1/1

    • Check each leg hole for debris and clear whats needed.

    • Insert a leg of the new brush into the correct hole, so the brush will click into its erect position.

    • Slide the other leg into its respective hole.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 1명과 함께

Jacob

회원 가입일: 03/15/17

101 평판

안내서 1개 작성함

배지: 2

팀

UMass Dartmouth, Team S6-G1, Isaacson Spring 2017 UMass Dartmouth, Team S6-G1, Isaacson Spring 2017 회원

UMASSD-ISAACSON-S17S6G1

4 회원들

안내서 9개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 14

전체 시간: 317