기기를 수리하세요 커뮤니티 상점

Black and Decker DustBuster 15.6V Suction Rubber Seal Replacement

소개

Replacing suction seal which is the cause of loss performance and/or air leak.

필요한 것

  1. Black and Decker DustBuster 15.6V Suction Rubber Seal Replacement, Suction Rubber Seal: 1 단계, 이미지 1/1

    • Press to blue unlock buttons at the base of the nozzle in word and pull forward .

    번역하기

  2. Black and Decker DustBuster 15.6V Suction Rubber Seal Replacement: 2 단계, 이미지 1/1

    • Locate rubber suction seal.

    번역하기

  4. Black and Decker DustBuster 15.6V Suction Rubber Seal Replacement: 3 단계, 이미지 1/1

    • Insert a metal spudger in between white plastic and rubber seal and gently drag spudger around see you lifting gently much like opening a can.

    번역하기

  5. Black and Decker DustBuster 15.6V Suction Rubber Seal Replacement: 4 단계, 이미지 1/1

    • Align slits on the bottom of new suction seal then press into those slits.

    • The seal should not come above white plastic.

    • If the nozzle does not connect to vacuum barrel, readjust seal and try to attach nozzle until it snaps into place.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Roberto Perez

회원 가입일: 03/31/17

101 평판

안내서 1개 작성함

배지: 2

팀

UMass Dartmouth, Team S6-G1, Isaacson Spring 2017 UMass Dartmouth, Team S6-G1, Isaacson Spring 2017 회원

UMASSD-ISAACSON-S17S6G1

4 회원들

안내서 9개 작성하였습니다

댓글 한 개

Where can I buy a new suction seal.

Alison Junk - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 6

30일 전: 19

전체 시간: 2,281