주요 콘텐츠로 건너뛰기

Black and Decker JS660 Angle Knob Replacement

필요한 것

  1. Black and Decker JS660 Angle Knob Replacement, Base: 1 단계, 이미지 1/2 Black and Decker JS660 Angle Knob Replacement, Base: 1 단계, 이미지 2/2
    • Unscrew the eight screws to open up the jigsaw.

  2. Black and Decker JS660 Angle Knob Replacement: 2 단계, 이미지 1/1
    • Use a screwdriver to remove the first screws securing the base to the jigsaw.

    • Remove the second screw.

    • Remove the base of the jigsaw.

  3. Black and Decker JS660 Angle Knob Replacement: 3 단계, 이미지 1/2 Black and Decker JS660 Angle Knob Replacement: 3 단계, 이미지 2/2
    • With the old jigsaw base off, replace it with the new base by following the steps in the reverse order.

    • Assemble the base on a steady surface.

  4. Black and Decker JS660 Angle Knob Replacement, Angle Knob: 4 단계, 이미지 1/3 Black and Decker JS660 Angle Knob Replacement, Angle Knob: 4 단계, 이미지 2/3 Black and Decker JS660 Angle Knob Replacement, Angle Knob: 4 단계, 이미지 3/3
    • As soon you disassemble the device, you can see the angle knob is not attached to any screws.

    • Remove the angle knob from the device.

결론

To reassemble your device, follow these instructions in reverse order.

Andrew Khouri

회원 가입일: 02/08/16

468 평판

안내서 4개 작성하였습니다

USF Tampa, Team 6-2, Eyestone Spring 2016 USF Tampa, Team 6-2, Eyestone Spring 2016 회원

USFT-EYESTONE-S16S6G2

4 회원들

안내서 4개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 3

30일 전: 4

전체 시간: 233