주요 콘텐츠로 건너뛰기

Black and Decker JS660 Blade Holder Replacement

필요한 것

  1. Black and Decker JS660 Blade Holder Replacement, Housing Disassembly: 1 단계, 이미지 1/2 Black and Decker JS660 Blade Holder Replacement, Housing Disassembly: 1 단계, 이미지 2/2
    • Remove the nine torx 15.875mm screws on the front of the jigsaw using a T-15 torx screwdriver.

  2. Black and Decker JS660 Blade Holder Replacement: 2 단계, 이미지 1/1
    • By separating the two housing halves, carefully remove the top plate.

  3. Black and Decker JS660 Blade Holder Replacement, Blade Holder: 3 단계, 이미지 1/1
    • Being careful to keep all parts together, grab the entire assembly and pull it directly out of the saw.

결론

To reassemble your device, follow these instructions in reverse order.

matt murray

회원 가입일: 01/27/17

682 평판

안내서 6개 작성하였습니다

Cal Poly, Team 22-9, Maness Winter 2017 Cal Poly, Team 22-9, Maness Winter 2017 회원

CPSU-MANESS-W17S22G9

4 회원들

안내서 7개 작성하였습니다

댓글 한 개

Why dose it keep throw the blade off

Delores Torres - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 3

30일 전: 25

전체 시간: 3,467