기기를 수리하세요 커뮤니티 상점

Black and Decker PHV1810 Motor Replacement

필요한 것

  1. Black and Decker PHV1810 Motor Replacement, Nozzle, Filter, and Catch Bowl: 1 단계, 이미지 1/2 Black and Decker PHV1810 Motor Replacement, Nozzle, Filter, and Catch Bowl: 1 단계, 이미지 2/2

    • To take off the nozzle, filter, and catch bowl first start off by pushing in the button identified with a red square and twist that part of the device toward the handle portion of the vacuum and it should click and pop off the chassis.

    번역하기

  2. Black and Decker PHV1810 Motor Replacement: 2 단계, 이미지 1/2 Black and Decker PHV1810 Motor Replacement: 2 단계, 이미지 2/2

    • Once the nozzle, filter and dust bowl have been removed each part can be removed from the nozzle section of the device.

    번역하기

  4. Black and Decker PHV1810 Motor Replacement, Motor: 3 단계, 이미지 1/2 Black and Decker PHV1810 Motor Replacement, Motor: 3 단계, 이미지 2/2

    • Remove the three screws.

    번역하기

  5. Black and Decker PHV1810 Motor Replacement: 4 단계, 이미지 1/2 Black and Decker PHV1810 Motor Replacement: 4 단계, 이미지 2/2

    • Flip the hand vac over and remove two screws.

    번역하기

  6. Black and Decker PHV1810 Motor Replacement: 5 단계, 이미지 1/3 Black and Decker PHV1810 Motor Replacement: 5 단계, 이미지 2/3 Black and Decker PHV1810 Motor Replacement: 5 단계, 이미지 3/3

    • Once you have successfully unscrewed the five screws holding the cover on you should be able to take the cover off.

    • Remove the L-shaped plastic hook.

    • Once the L shaped hook has been removed the motor will easily fall out of place.

    번역하기

    • Once the motor has been removed from its home the two wires that are giving it power can easily be removed by pulling on them carefully.

    • This will then allow for you to replace the motor.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 4

전체 시간: 422