기기를 수리하세요 커뮤니티 상점

Black and Decker PS1800 Chuck Replacement

소개

This guide will show you how to replace the Black and Decker PS1800's chuck.

필요한 것

  1. Black and Decker PS1800 Chuck Replacement, Chuck: 1 단계, 이미지 1/2 Black and Decker PS1800 Chuck Replacement, Chuck: 1 단계, 이미지 2/2

    • Using the T20 Torx Security screwdriver, take out the 2.3 mm screw inside the chuck.

    번역하기

  3. Black and Decker PS1800 Chuck Replacement: 2 단계, 이미지 1/2 Black and Decker PS1800 Chuck Replacement: 2 단계, 이미지 2/2

    • Set the drill to 'drill mode' and tighten the chuck with the Allen wrench in it.

    • 'Drill mode' is represented by the drill bit symbol

    • Use the Allen wrench to unscrew the chuck by rotating it counter clockwise.

    번역하기

  4. Black and Decker PS1800 Chuck Replacement: 3 단계, 이미지 1/1

    • Remove the chuck completely by unscrewing it in a counter clockwise direction.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 6명과 함께

David Nawl

회원 가입일: 10/19/16

237 평판

안내서 2개 작성하였습니다

배지: 9

배지 +6개 더

팀

IUPUI, Team 2-3, Baechle Fall 2016 IUPUI, Team 2-3, Baechle Fall 2016 회원

IUPUI-BAECHLE-F16S2G3

5 회원들

안내서 6개 작성하였습니다

댓글 한 개

Is the torx screw right or left hand thread

andrewaporter - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 27

전체 시간: 2,746