기기를 수리하세요 커뮤니티 상점

Black and Decker TR1278B Bread Grabber Spring Replacement

소개

This is a replacement guide for the bread grabber springs on the Black and Decker TR1278B.

필요한 것

  1. Black and Decker TR1278B Bread Grabber Spring Replacement, Top Cover: 1 단계, 이미지 1/1

    • Unplug the toaster before disassembly.

    • Remove the carriage lever by pulling it away from the toaster.

    번역하기

  2. Black and Decker TR1278B Bread Grabber Spring Replacement: 2 단계, 이미지 1/1

    • Toaster will be turned upside down. Clear crumb tray or work over a paper towel.

    • Turn the toaster upside down.

    • Unscrew all four 4mm screws on the bottom using a Phillip's head #2 (PH2) screwdriver.

    • Or a slightly different model has six screws that require an allen wrench (hex key). Ones that have a ball end will not work. I had to use one that had more of a Star of David, pointy pattern to it.

    번역하기

  3. Black and Decker TR1278B Bread Grabber Spring Replacement: 3 단계, 이미지 1/1

    • Detach the bottom from the front cover using the plastic opening tool.

    번역하기

  5. Black and Decker TR1278B Bread Grabber Spring Replacement: 4 단계, 이미지 1/1

    • Turn the toaster right side up.

    • Support the bottom. The ribbon cable that connects the toaster to the front cover can be damaged.

    • Lift the front cover.

    • Lift carefully. Again the ribbon cable can be damaged.

    번역하기

  6. Black and Decker TR1278B Bread Grabber Spring Replacement: 5 단계, 이미지 1/1

    • Detach the bundled cable connector from the toaster by carefully pulling it away from the circuit board.

    번역하기

  7. Black and Decker TR1278B Bread Grabber Spring Replacement, Bread Grabber Spring: 6 단계, 이미지 1/1

    • Locate the spring

    번역하기

  8. Black and Decker TR1278B Bread Grabber Spring Replacement: 7 단계, 이미지 1/1

    • Press down on the toaster lever to gain access to the grabber spring located behind the large metal plate.

    • Use metal spudger to loosen clamps on spring.

    번역하기

  9. Black and Decker TR1278B Bread Grabber Spring Replacement: 8 단계, 이미지 1/1

    • Use needle nose tweezers to pull the spring off of its hook.

    • Repeat this step for the opposite side.

    번역하기

  10. Black and Decker TR1278B Bread Grabber Spring Replacement: 9 단계, 이미지 1/1

    • Remove the old spring from the toaster unit to insert the new one.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Brea-Monique

회원 가입일: 02/15/17

351 평판

안내서 3개 작성하였습니다

배지: 8

배지 +5개 더

팀

USF Tampa, Team 8-1, Eyestone Spring 2017 USF Tampa, Team 8-1, Eyestone Spring 2017 회원

USFT-EYESTONE-S17S8G1

3 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 9

전체 시간: 1,183