기기를 수리하세요 커뮤니티 상점

Black and Decker WP900 Exterior Casing Replacement

소개

This page gives instructions for disassembling the Black and Decker WP900 6-Inch Orbital Waxer and Polisher to where the external casing can be removed from all internal workings.

필요한 것

  1. Black and Decker WP900 Exterior Casing Replacement, Exterior Casing: 1 단계, 이미지 1/1

    • Using the plastic tool, detach the handle tab as shown.

    • Make sure the device is unplugged.

    편집

  2. Black and Decker WP900 Exterior Casing Replacement: 2 단계, 이미지 1/1

    • Using the Phillips #1 screwdriver, unscrew all of the screws. There should be 8-30mm screws to remove.

    • Be sure to keep track of where each screw was placed in the device for later reassembly.

    편집

  4. Black and Decker WP900 Exterior Casing Replacement: 3 단계, 이미지 1/3 Black and Decker WP900 Exterior Casing Replacement: 3 단계, 이미지 2/3 Black and Decker WP900 Exterior Casing Replacement: 3 단계, 이미지 3/3

    • Remove the back panel of the external casing, leaving all internal components resting in the front panel.

    • Remove the black handle from the main external casing.

    편집

  5. Black and Decker WP900 Exterior Casing Replacement: 4 단계, 이미지 1/1

    • Using the Phillips #1 screwdriver, remove the two 22mm screws.

    • The metal bracket will detach with the two screws.

    • Using the Flathead 3/32" screwdriver, remove two 22mm screws.

    편집

  6. Black and Decker WP900 Exterior Casing Replacement: 5 단계, 이미지 1/2 Black and Decker WP900 Exterior Casing Replacement: 5 단계, 이미지 2/2

    • Gently pull the power cord out from the control module.

    • Remember, when reassembling the device, the black wire should be on the top.

    편집

  7. Black and Decker WP900 Exterior Casing Replacement: 6 단계, 이미지 1/1

    • Firmly grasping the motor dislodge the internal components from the frontal external casing.

    • Once the motor has been removed, the external casing can now be replaced.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

David Hutchings

회원 가입일: 03/28/16

101 평판

안내서 1개 작성함

배지: 2

팀

IUPUI, Team 8-8, Wilson Spring 2016 IUPUI, Team 8-8, Wilson Spring 2016 회원

IUPUI-WILSON-S16S8G8

4 회원들

안내서 4개 작성하였습니다

댓글 한 개

Hello, this is Adam Kinnett from Group 7. You have done an excellent job on your photos as well as the descriptions and formatting.

**One of your Wiki pages on the search says "Back and Decker".

Adam Kinnett - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 8

전체 시간: 879