소개

This guide demonstrates how to remove and replace the LCD screen.

부품

부품은 필요하지 않습니다.

  1. Remove the battery cover and battery before continuing.
    • Remove the battery cover and battery before continuing.

    • Remove the six T6 Torx screws on the back of the phone.

    • Make sure to keep the screws somewhere that they will not get lost.

    댓글 쓰기

  2. Using your finger nail or a spudger, carefully pry up the back cover.
    • Using your finger nail or a spudger, carefully pry up the back cover.

    • Begin in one spot and slowly circle around the device as you pry up all of the back cover.

    댓글 쓰기

    • Lift off the back cover.

    댓글 쓰기

    • Remove the two T6 screws.

    댓글 쓰기

    • Remove the daughterboard.

    • Remove the exposed vibration motor.

    댓글 쓰기

    • Unscrew the screw holding the back plate.

    댓글 쓰기

    • Carefully pry off front cover. Make sure the plastic clips are unlatched before applying force.

    • Lift off front cover from metal plate.

    댓글 쓰기

    • Pry off the LCD screen with spudger at the two clips.

    댓글 쓰기

    • Remove the LCD screen and replace it with a new one.

    • Careful not to rip the LCD ribbon.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Neil Johnson

회원 가입일: 2010년 01월 24일

12 평판

안내서 6개 작성하였습니다

Cal Poly, Team 14-44, Regan Winter 2010 Cal Poly, Team 14-44, Regan Winter 2010 회원

CPSU-REGAN-W10S14G44

4 회원들

안내서 8개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 2

전체 시간: 2,504