소개

This Repair guide will walk you through the steps on how to replace a RIM Blackberry 8700c logic board.

부품

부품은 필요하지 않습니다.

Remove the back cover by pushing down on the button and sliding the cover towards the bottom of the phone. Set the cover aside.  The battery will now be exposed.
  • Remove the back cover by pushing down on the button and sliding the cover towards the bottom of the phone.

  • Set the cover aside. The battery will now be exposed.

댓글 쓰기

Remove the battery by pulling back on the notch on top edge of the battery. Set the battery aside.
  • Remove the battery by pulling back on the notch on top edge of the battery.

  • Set the battery aside.

댓글 쓰기

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Unscrew and remove all four T6 Torx screws.
  • Unscrew and remove all four T6 Torx screws.

댓글 쓰기

Pull the back cover of the phone off and set it aside. Pull the back cover of the phone off and set it aside.
  • Pull the back cover of the phone off and set it aside.

댓글 쓰기

Unscrew and remove all 4 T6 Torx screws. Unscrew and remove all 4 T6 Torx screws.
  • Unscrew and remove all 4 T6 Torx screws.

댓글 쓰기

Lift and remove inner back cover and set aside. A small side piece may fall away but is simple to reattach. Remove logic board by gently lifting it off of the front cover of the phone.
  • Lift and remove inner back cover and set aside.

    • A small side piece may fall away but is simple to reattach.

  • Remove logic board by gently lifting it off of the front cover of the phone.

    • New logic board can now simply be set in place.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

arlebrun

회원 가입일: 2009년 12월 02일

1 평판

안내서 1개 작성함

Cal Poly, Team 18-4, Maness Fall 2009 Cal Poly, Team 18-4, Maness Fall 2009 회원

CPSU-MANESS-F09S18G4

4 회원들

안내서 5개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 2

전체 시간: 3,095