주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

소개

Work area should be lint free, clean and well lit.

부품

지정된 부품이 없습니다.

  1. Open the rear panel to expose the battery and the chassis assembly. Remove the battery.
    • Open the rear panel to expose the battery and the chassis assembly. Remove the battery.

  2. Use a small, non-marring plastic opening tool  to remove the lower-rear cover. (Credit cards and guitar picks work great.)
    • Use a small, non-marring plastic opening tool to remove the lower-rear cover. (Credit cards and guitar picks work great.)

  3. Use a T6 Torx screwdriver to loosen and remove the six screws from the chassis as shown.
    • Use a T6 Torx screwdriver to loosen and remove the six screws from the chassis as shown.

    • Flip the phone over to the front and remove the plastic bezel.

  4. SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits

    SKIP THE UPGRADE

    Save by fixing with an all-in-one kit.

    Shop iPhone Fix Kits
  5. Remove the midframe from the back of the phone, which should now be free after removing the screws.  The green motherboard should now be exposed.
    • Remove the midframe from the back of the phone, which should now be free after removing the screws. The green motherboard should now be exposed.

  6. Remove the front-cover by carefully prying the side release tabs, located on the side of the phone.
    • Remove the front-cover by carefully prying the side release tabs, located on the side of the phone.

  7. Gently pry the side release tabs to lift the flexing keypad from the frame. The navigation ball may come loose at this point. Set it aside with the keypad for reassembly. The navigation ball may come loose at this point. Set it aside with the keypad for reassembly.
    • Gently pry the side release tabs to lift the flexing keypad from the frame.

    • The navigation ball may come loose at this point. Set it aside with the keypad for reassembly.

  8. Gently lift the motherboard.
    • Gently lift the motherboard.

    • Locate the screen's ribbon cable underneath the motherboard, and detach it from the phone.

  9. Carefully pry at the sides of the screen until the display assembly is free.  Remove the display from the motherboard unit. Carefully pry at the sides of the screen until the display assembly is free.  Remove the display from the motherboard unit.
    • Carefully pry at the sides of the screen until the display assembly is free. Remove the display from the motherboard unit.

결론

To reassemble your device, follow these instructions in reverse order.

다른 4명이 해당 안내서를 완성하였습니다.

Renae Bishop

회원 가입일: 2011년 09월 07일

68 평판

안내서 4개 작성하였습니다

Cuesta, Team 1-3, Zipperian Fall 2011 Cuesta, Team 1-3, Zipperian Fall 2011 회원

CUESTA-ZIPPERIAN-F11S1G3

3 회원들

안내서 8개 작성하였습니다

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 3

전체 시간: 4,128