소개

This guide outlines how to do initial disassembly for the device and doubles as prerequisites for other guides.

부품

부품은 필요하지 않습니다.

  1. With the back of the device facing you, press down on the button while sliding the battery casing away from the speaker to remove it.
    • With the back of the device facing you, press down on the button while sliding the battery casing away from the speaker to remove it.

    댓글 쓰기

  2. Use a plastic opening tool or fingernails to unclip the two hinges of the speaker covering and remove it.
    • Use a plastic opening tool or fingernails to unclip the two hinges of the speaker covering and remove it.

    댓글 쓰기

    • Remove the battery by pushing against it from the right and then pulling towards you.

    댓글 쓰기

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Remove the four screws indicated in the picture with a #T6 Torx Bit screwdriver and set them aside.

    댓글 쓰기

    • Use a plastic opening tool or your fingernails to remove the plastic backing.

    • Start with the seam indicated in the picture and slide the plastic opening tool until the case is seperated.

    댓글 쓰기

    • Unscrew the four screws indicated in the picture with #T6 Torx Bit screwdriver.

    • Place the four screws released from the phone in a plastic bag.

    댓글 쓰기

    • The black battery casing and logic board can now be separated for the following steps.

    댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

kelogan

회원 가입일: 2009년 11월 04일

1 평판

안내서 2개 작성하였습니다

Cal Poly, Team 9-17, Regan Fall 2009 Cal Poly, Team 9-17, Regan Fall 2009 회원

CPSU-REGAN-F09S9G17

4 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 2,062