소개

Disassembling the logic board in the rear of the Blackberry allows you to get to the LCD screen and keypad.

부품

부품은 필요하지 않습니다.

Turn the phone upside down. Push down on the black button on the back of the phone to slide the rear panel off.
  • Turn the phone upside down.

  • Push down on the black button on the back of the phone to slide the rear panel off.

  • The battery should be visible now.

댓글 쓰기

Hold the BlackBerry in one hand face-up with the screen facing towards you. Gently smack the phone against your hand to dislodge the battery. Gently smack the phone against your hand to dislodge the battery.
  • Hold the BlackBerry in one hand face-up with the screen facing towards you.

  • Gently smack the phone against your hand to dislodge the battery.

댓글 쓰기

Use a T6 Torx screwdriver to remove the 6 screws holding the rear of the phone. Use a T6 Torx screwdriver to remove the 6 screws holding the rear of the phone.
  • Use a T6 Torx screwdriver to remove the 6 screws holding the rear of the phone.

댓글 쓰기

Use a pick or small tool to push the clips holding the rear away from you. Applying too much pressure could break the plastic clips and permanently damage your Blackberry.
  • Use a pick or small tool to push the clips holding the rear away from you.

  • Applying too much pressure could break the plastic clips and permanently damage your Blackberry.

댓글 쓰기

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Repeat the process of unlatching the clips for the top section of the Blackberry.
  • Repeat the process of unlatching the clips for the top section of the Blackberry.

댓글 쓰기

Slide the rear panel forward to reveal the logic board. Slide the rear panel forward to reveal the logic board.
  • Slide the rear panel forward to reveal the logic board.

댓글 쓰기

Remove the indicated screws using a T6 Torx screwdriver. Remove the indicated screws using a T6 Torx screwdriver.
  • Remove the indicated screws using a T6 Torx screwdriver.

댓글 쓰기

Remove the logic board. Remove the indicated screw using the T6 Torx screwdriver.
  • Remove the logic board.

  • Remove the indicated screw using the T6 Torx screwdriver.

댓글 쓰기

Pull the metal plate away from the front panel of the cell phone. Pull the metal plate away from the front panel of the cell phone.
  • Pull the metal plate away from the front panel of the cell phone.

댓글 쓰기

Place the faceplate face-down and the interior of the phone face-up, as shown.
  • Place the faceplate face-down and the interior of the phone face-up, as shown.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

Nathan

회원 가입일: 2010년 01월 18일

31 평판

안내서 7개 작성하였습니다

Cal Poly, Team 5-7, Forte Winter 2010 Cal Poly, Team 5-7, Forte Winter 2010 회원

CPSU-FORTE-W10S5G7

5 회원들

안내서 7개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 3,348