주요 콘텐츠로 건너뛰기

Blackberry Bold 9000 Volume Toggle Replacement

필요한 것

  1. Blackberry Bold 9000 Volume Toggle Replacement, Battery: 1 단계, 이미지 1/1
    • Place your Blackberry facedown in front of you.

  2. Blackberry Bold 9000 Volume Toggle Replacement: 2 단계, 이미지 1/1
    • Press the cover release button on the bottom of your device. Lift and remove the back cover.

  3. Blackberry Bold 9000 Volume Toggle Replacement: 3 단계, 이미지 1/1
    • From the top, use your fingernail to lift the battery out.

  4. Blackberry Bold 9000 Volume Toggle Replacement, Rear Case: 4 단계, 이미지 1/1
    • Remove the SIM card.

  5. Blackberry Bold 9000 Volume Toggle Replacement: 5 단계, 이미지 1/1
    • Remove the six 7.0mm Torx screws securing the rear case to the rest of the phone.

  6. Blackberry Bold 9000 Volume Toggle Replacement: 6 단계, 이미지 1/1
    • Use the plastic opening tool to remove the rear case.

  7. Blackberry Bold 9000 Volume Toggle Replacement, Volume Toggle: 7 단계, 이미지 1/1
    • Lift out the motherboard assembly using the plastic opening tool, prying at all four sides of the device.

    • Try to remove from left to right, using caution with the audio jack on the right side of the device.

  8. Blackberry Bold 9000 Volume Toggle Replacement: 8 단계, 이미지 1/1
    • Locate the volume toggle on the main frame of the phone.

    • Using the spudger, push the toggle in from the outside and remove.

  9. Blackberry Bold 9000 Volume Toggle Replacement: 9 단계, 이미지 1/1
    • Place the new toggle in, using the pointed end of the spudger to attach the toggle to the upper and lower pins.

    • Make sure the toggle is completely in place by pressing it outward into the frame.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Kelly

회원 가입일: 01/18/12

566 평판

안내서 6개 작성하였습니다

Cal Poly, Team 8-17, Maness Winter 2012 Cal Poly, Team 8-17, Maness Winter 2012 회원

CPSU-MANESS-W12S8G17

4 회원들

안내서 7개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 1

전체 시간: 2,443